581842
9
Zoom out
Zoom in
Previous page
1/13
Next page
iPad
3. Open a new page in your internet browser (Internet Explorer, Safari, Chrome etc).
In the address bar of your browser, type 192.168.1.1 followed by 'enter' and the
Minx Air setup page will be displayed.
4. Select your home wi- network from the 'Service Set ID (SSID)' drop down list
of choices.
The lists shows all the networks the Minx Air can nd locally.
5. Now type your home Wi-Fi/Network password into the red box, and click the
'Apply' button.
Note: If you don't know your Wi-Fi password key, it's commonly found on a label on
your internet modem/router.
6. If you are happy that you have entered your details correctly, click 'OK' to nish.
The Minx Air set-up page may now display an 'error' or 'no data' received' type
message. Don't worry, this is normal. You can now close your internet browser.
7. After a few seconds, the Minx Air will be connected to your network (successful
connection is indicated by a solid green
light on the rear of the product). This
can take up to 30 seconds.
Note:
If the light on the rear continues ashing green
, this indicates that the Minx
Air has been unsuccessful with the wi- connection. Carry out a factory reset and
repeat the process.
If your computer/tablet has not already done so automatically, change the Wi-Fi/
network setting on your computer/tablet back to your home network.
Connecting to a wireless network using WPS
If your router supports WPS (Wi-Fi Protected Setup) then this is a simple method to
connect the Minx Air to your network without needing to know your wi- network key
or broadcast network name SSID.
WPS allows two devices to discover each other for a short time (usually a minute or
two) after the WPS buttons have been pressed on both devices.
To connect using WPS simply press the WPS button on your router (please consult
router instructions for details) then shortly after press the WPS button on the rear
panel of the Minx Air (briey press it once).
The WPS light on the rear of the Minx Air will ash orange > green > red
for up to 2 minutes whilst the Minx Air looks for your router.
If the connection is successful connection the WPS light will turn solid green
and
your wi- connection is ready.
Connecting to a wired network
Note: Make sure that the Minx Air is switched off before plugging in the ethernet
cable.
Plug one end of a network cable (Category 5/5E straight through Ethernet cable)
into the LAN port on the back of the unit and the other end directly to a free port
on your router.
Note: Only connect the LAN port of the player to an Ethernet port that supports
10BASE-T or 100BASE-TX. Connecting to any other ports or jacks, such as a phone
jack, can damage the unit. Now turn on your Minx Air.
The Minx Air should automatically connect to your network via DHCP; this means it
will be given an IP address by your router automatically.
NOTE: Your Minx Air must rst be connected to a network via Wi-Fi or
Ethernet for Internet Radio or Airplay streaming to be available.
9
ENGLISH
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cambridge Audio Minx Air200 BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cambridge Audio Minx Air200 BT in the language / languages: English as an attachment in your email.

The manual is 5,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cambridge Audio Minx Air200 BT

Cambridge Audio Minx Air200 BT User Manual - English - 2 pages

Cambridge Audio Minx Air200 BT Quick start guide - German - 2 pages

Cambridge Audio Minx Air200 BT User Manual - Dutch - 2 pages

Cambridge Audio Minx Air200 BT Quick start guide - French - 2 pages

Cambridge Audio Minx Air200 BT Quick start guide - Italian - 2 pages

Cambridge Audio Minx Air200 BT Quick start guide - Polish - 2 pages

Cambridge Audio Minx Air200 BT Quick start guide - Swedish - 2 pages

Cambridge Audio Minx Air200 BT Quick start guide - Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info