581842
8
Zoom out
Zoom in
Previous page
1/13
Next page
1
Standby/On button
Controls the standby state of the unit. When the top panel Standby/On button on
the unit itself is illuminated red, the system is in its <0.5W standby state. When
the button is illuminated white the unit is on and ready for playback. When the unit
is rst turned on it takes approximately 20 seconds to fully power up and become
active. During this phase the top panel button will blink red on and off .
2
Volume buttons
Volume up is labelled ‘+’, volume down is labelled ‘-’.
3
Mute button
Press to mute and press again to un-mute the unit.
4
X Button
Stops streaming playback (and returns the unit to the analogue inputs).
Starting up streaming playback from Bluetooth, Airplay or Internet Radio will always
cause the Minx Air to automatically switch back to that source. Otherwise the
system defaults to the analogue inputs.
To stop Bluetooth, Airplay or Internet Radio playback and return to the analogue
inputs just press the X button. Press a second time to mute the analogue input.
5
Pairing button
Used to pair (connect to) Bluetooth devices so that they can be played back
wirelessly. When the pair button is pressed the pair button on the top panel of the
unit will blink blue for approximately 30 seconds. This indicates that the system is
in pairing mode. See later section.
6
Presets buttons 1 – 10
Press to recall an Internet Radio preset. As shipped from the factory 10 stations will
have been pre-assigned, 5 can be accessed from the top panel buttons, all 10 can
be accessed via the remote. To change the assigned stations use the free Minx Air
App for Android or Apple devices, see later section.
7
Bass controls
Allows setting of the bass/low frequency response of the unit tailored to your taste
and the acoustics of your room.
Bass up is labelled ‘+’ and bass down is labelled ‘–’.
Getting startedRemote control
For help connecting Minx Air to your Wi-Fi network, we recommend watching the
help videos available at http://www.cambridgaudio.com/MinxAirSupport. Also
please see the Wi-Fi setup guide supplied with your unit.
Note: If you make a mistake during the connection process, reset the Minx Air. To
do this, press and hold the Standby/On button and WPS button on the rear panel
for 10-15 seconds until the Minx Air switches off, then repeat the connection
process.
Network connections
Before you can use your Minx Air for iRadio/Streaming you must have the following:
A broadband internet connection (such as ADSL) to a suitable internet service
provider (ISP).
A network connection either wirelessly via 802.11b/g or n Wi-Fi or wired Ethernet
connection (10 or 100 M bits/sec via an RJ45 connection).
In many cases the broadband modem, router and wireless access point will be a
single combined unit supplied by your Internet Service Provider or bought from a
computer store.
If your wireless network is congured to use Wired Equivalent Privacy (WEP) or Wi-Fi
Protected Access (WPA) data encryption then you will need to know your WEP or WPA
key so you can get the Minx Air to communicate with the network.
IMPORTANT:
Before you continue, make sure that your wireless access point or router is
powered up and working with your broadband internet service (use your computer
to verify this). To get this part of the system working you must read the instructions
supplied with the wireless access point or router.
The Minx Air can be congured to connect to a Wired or Wireless network.
For wired setup, see later section 'Connecting to a wired network'.
Connecting to a wireless network
1. Connect the Minx Air to the mains power and press the button on top of the
unit. Wait for up to 20 seconds for the ashing light on the rear panel to ash
green
and orange . If the light does not ash green and orange after 20
seconds, please carry out a factory reset as detailed above, and start again.
2. Go to your computer/tablet and click on the wi-/network logo and select Minx
Air_XXX.
Mac
PC
12
3 4 5
7
6
8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cambridge Audio Minx Air200 BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cambridge Audio Minx Air200 BT in the language / languages: English as an attachment in your email.

The manual is 5,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cambridge Audio Minx Air200 BT

Cambridge Audio Minx Air200 BT User Manual - English - 2 pages

Cambridge Audio Minx Air200 BT Quick start guide - German - 2 pages

Cambridge Audio Minx Air200 BT User Manual - Dutch - 2 pages

Cambridge Audio Minx Air200 BT Quick start guide - French - 2 pages

Cambridge Audio Minx Air200 BT Quick start guide - Italian - 2 pages

Cambridge Audio Minx Air200 BT Quick start guide - Polish - 2 pages

Cambridge Audio Minx Air200 BT Quick start guide - Swedish - 2 pages

Cambridge Audio Minx Air200 BT Quick start guide - Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info