763887
16
Zoom out
Zoom in
Previous page
1/20
Next page
LK10
Learning keypad
Installation guide
2
ENGLISH
Your music +our passion
Contents
2
Introduction.....................................................3
System setup...................................................4
Installation notes............................................6
Keypad overview.............................................8
On-screen display............................................9
Cloning from the remote control...................10
Settings menus.............................................13
Troubleshooting............................................18
Limited warranty...........................................19
Thank you for purchasing this Cambridge Audio Incognito product. Incognito is a cost-
effective, modular based multi-room system using standard Cat-5/5e or Cat-6 cable to
distribute hi-fi quality sound around a home. Optionally, video can also be distributed using
co-axial cable and a VH10 video hub.
The LK10 in-wall learning keypad must be used with the Incognito KP10 A-BUS™ audio
keypad and LR10 learning remote.
The LK10 keypad clones learnt IR codes and macros from the LR10 remote which once
transferred allow the LK10 to be used to control your source equipment conveniently from
the wall.
The LK10 is fitted on the wall by fixing it into a standard double J-box electrician’s back-box
and double Decora™ style faceplate (not included) next to a KP10 keypad. All knock-outs in
the back-box should be removed to provide maximum ventilation. Care should be taken in
choosing a site for the LK10, always refer to the precautions in this guide.
Thank you for taking the time to read this manual, we do recommend you keep it for future
reference.
Matthew Bramble, Cambridge Audio Technical Director
and the LK10 design team.
Introduction
3
LK10
ENGLISH
To add your LK10 keypad into your Incognito system, refer to the diagram below:
Important: LK10 will only operate when connected to KP10 as part of a complete AH10
hub-based system. It is not compatible with ‘Incognito Ready’ amplifiers.
System setup
4
(Set) Menu Title Exit
Fav-1Shift
Speaker cable Speaker cable
SS10 SS10
AH10
Cat-5/5e cable
KP10 KP10 LK10
PS10
Ribbon cable
(supplied with
LK10)
5
The LK10 should be placed next to the KP10, using a double J-Box and double Decora™
faceplate (not supplied).
Front viewRear view
KP10 connector - Connects the LK10 to the KP10 with the supplied ribbon cable.
I.C.P - In-circuit programming socket, used to upgrade keypad software when necessary.
1
2
1
2
LK10
ENGLISH
The LK10 is fitted on the wall by fixing it into a double USA-type J-Box (electrician’s back-
box). All knock-outs in the back-box should be removed to provide maximum ventilation.
Where it is desired to fit a mains lighting switch etc next to a keypad, a barrier-box or two
single back-boxes must be used (bear in mind it is not preferable to fit the keypad next to a
light-switch particularly if the faceplate styles will differ). Only a qualified electrician should
attempt such installations.
Avoid fitting the LK10/KP10 where there is line of sight to another LK10/KP10. In such
situations both keypads may pick up the same commands from a remote control and it will
be difficult to control each zone independently.
Avoid fitting the LK10/KP10 where there is line of sight to the source equipment for the
system. In such situations the source equipment may pick up the same IR commands
directly as are picked up by the keypad and sent to the source equipment. This can
interfere with the remote operation of the source equipment.
Do not fit the keypad in areas directly lit by strong sunlight or where it will be strongly lit by
fluorescent tubes. These can be sources of infra-red energy which can interfere with the
remote control operation of the system. Some plasma televisions can radiate a lot of infra-
red energy and care should be taken if fitting a LK10/KP10 near a plasma screen
television. Avoid placing the LK10/KP10 near to dimmer switches or other items, which
generate a lot of electrical noise.
Safety precautions
Care should be taken when choosing the site for a LK10; the keypad must never be
installed in a back-box which also contains mains wiring or in areas of high humidity.
Installation notes
6
7
Power requirement
The LK10 runs on 24 V DC (@ 250mA max) supplied through the connecting cable from
the KP10 keypad. As such there is no mains voltage present in the KP10 and the unit is
often safe to fit in areas where only extra low voltage (ELV) equipment is permitted.
However, it is imperative that you always check the wiring regulations in force for your
application and area.
Faceplates
The LK10 faceplate system is based on the DecoraTM standard and is interchangeable with
the wide range of faceplates made by manufacturers such as Leviton etc that conform to
this standard. If it is desired to fit another faceplate, it can be replaced by gently prising
apart the LK10 faceplate and snapping on another in its place.
Approvals
This product complies with European Low Voltage (73/23/EEC) and
Electromagnetic Compatibility (89/336/EEC) Directives when used and installed
according to this instruction manual. For continued compliance only Cambridge
Audio accessories should be used with this product and servicing must be referred to
qualified service personnel.
The crossed-out wheeled bin is the European Union symbol for indicating separate
collection for electrical and electronic equipment. This product contains electrical
and electronic equipment which should be reused, recycled or recovered and
should not be disposed of with unsorted regular waste. Please return the unit or
contact the authorised dealer from whom you purchased this product for more
information.
LK10
ENGLISH
8
Buttons numbered 1-8 have dual functions, which
are controlled by the Shift button. These buttons
generate IR codes or macros cloned from the
buttons of the same name on the LR10 learning
remote (see later section on Cloning).
Primary functions Secondary functions
Play Enter
Skip forward Up
Skip backward Down
Scan backward Left
Scan forward Right
Stop Exit
Pause Title
Fav-1 (Favourite) Menu
Set (Settings) Shift
Cloning port
Display screen
Note: The actual functions of the buttons are
completely dependent on the codes taught into
the LR10 remote.
For full instructions on Shift/Settings, learning
buttons and the cloning port, please refer to the ‘Operating instructions’ and ‘Keypad
setup’ sections of this guide.
(Set) Menu Title Exit
Fav-1Shift
EDIT SLEEP LEARN
SHARED
PM
Keypad overview
1
3
4 5
2
8 7 6
10
11
9
1
2
3
4
5
6
7
8
9
10
11
Week days - The bar over a letter indicates the day of the week.
Alarm - Displayed when the alarm function is set.
IR - Indicates when an infra-red signal is sent from the LK10.
Time - Displays current time. ‘PM’ appears when 12 hour clock is set.
Date - Can be set as Month/Date or Date/Month.
Shared - Displayed when sharing a source with another zone connected to the same
AH10 hub.
Edit - Displayed when in Edit mode (Settings menu).
Sleep - Displayed when the sleep function is set.
Learn - Displayed when in Learn/Clone mode.
Name bar - Displays the name of the source, button or function.
For full instructions on these functions, please refer to the ‘Keypad setup’ section of this
guide.
9
On-screen display
EDIT SLEEP LEARN
SHARED
PM
10
12 3
45
6
7 98
1
2
3
4
5
6
7
8
9
10
LK10
ENGLISH
The LK10 can only be used to control source equipment once it
has been cloned from the LR10. This transfers the necessary IR
codes and macros into the LK10. The Incognito LR10 is a
sophisticated learning remote which is able to learn the codes of
all the source equipment from their own remotes.
Once the LR10 itself has been programmed the user can clone all
macros and programmed information from the LR10 to the LK10,
allowing the keypad to also perform the same operations (IR
codes, macros, button names and clock settings).
Note: Only the learning buttons highlighted on the remote are
cloned to the LK10.
Please refer to the LR10’s own manual for full details on how to teach
codes into the LR10, advice on macros etc. Once the LR10 is fully
programmed/setup, you can clone it into the LK10.
To begin cloning, plug the supplied connection
cable into the cloning port on the LK10 and
LR10, then put the LK10 into Learn mode.
Set the LR10 to transmit (the LK1O will default
to Receiving mode).
On the back of the LR10 press the Edit button
4 times (using a paperclip or similar) to enter
Clone mode. ‘REC/TRX’ will appear on both
displays.
10
Cloning from the remote control
(Set) Menu Title Exit
Fav-1Shift
EDIT SLEEP LEARN
SHARED
PM
11
3. Press the Enter button on the remote.
Display shows ‘SENDING’.
LK10 keypad - Receiving data LR10 remote - Transmitting data
2. Press the button on the remote
until ‘TRX’ is flashing.
1. Press and hold the Set button for five
seconds. When ‘LEARN’ is displayed,
release the button. ‘READY’ will then be
displayed on screen.
4. ‘RXING..’ will then be displayed, to
indicate it is receiving data.
1 2
34
LK10
ENGLISH
For the LK10 to receive commands, it must be first put into Learn mode. The LK10 has a
series of menus that can be accessed by pressing and holding the Shift/Set button on the
front panel. The menu options are continuously scrolled on the LK10 display until you
release the Shift/Set button.
Follow the next steps to complete the cloning operation:
After approximately 7 minutes the keypad display should show ‘COMPLETE’ and return to
normal operation. All data has been transferred.
If the clone fails the keypad will show ‘ERROR’ or ‘TIMEOUT’. Put the transmitting LR10
remote back into Clone mode and repeat the process.
Note: Once the cloning process has been started it must be completed, as it overwrites the
software in the receiving LK10 keypad.
12
Cloning from the remote control
Note: You still use your KP10 keypad to control audio functions (volume adjustment, source
selection etc).
To personalise other settings of the LK10, press and hold the Set button for four seconds to
activate the Settings menus (Fig. 1). The LK10 screen will continuously scroll through the
five menu options:
To select the option you require release the button when the menu option is displayed on
the screen (Fig. 2).
To return, press Exit (Fig. 3). Any changes you have have made will be saved.
13
Settings menus
LK10
Learn Alarm Sleep Setup Configure
(Set) Menu Title Exit
Fav-1Shift
(Set) Menu Title Exit
Fav-1Shift
(Set) Menu Title Exit
Fav-1Shift
ENGLISH
1 2 3
Settings menus
Days
When selecting ‘DAYS’, use the and keys to scroll to single day,
Monday to Friday, weekend or everyday.
On/Off
When the alarm is selected on, the Alarm icon will appear on the display.
Alarm menu
Press the Set button for five seconds and release when ‘ALARM?’ is displayed on the
screen.
Use the and buttons
to navigate the menu.
Use the and buttons to
adjust the desired option.
Note: When a Source is
selected, it will display the
default Source programmed into
the KP10 keypad.
(Set) Menu Title Exit
Fav-1Shift
Alarm Hour Minute Days Source On/Off
14
15
LK10
ENGLISH
Sleep menu
This menu allows you to set the time at which the LK10 will automatically switch off.
Press the Set button for five seconds and release when ‘SLEEP?’ is displayed on the screen.
Use the and buttons
to navigate the menu.
Use the and buttons to
adjust the desired option.
(Set) Menu Title Exit
Fav-1Shift
Sleep Hour Minute On/Off
16
Setup menu
This menu lets the user manually set the time and date of the LK10. Press the Set button
for five seconds and release when ‘SETUP?’ is displayed on the screen.
Use the and buttons
to navigate the menu.
Use the and buttons to
adjust the desired option.
Note: The time and date will also be set automatically after a download from the LR10.
(Set) Menu Title Exit
Fav-1Shift
Setup Hour Minute Date/Month Month/Date
Year
Settings menus
17
LK10
ENGLISH
Configure menu
Press the Set button for five seconds and release when ‘CONFIG?’ is displayed on the
screen.
Use the and buttons
to navigate the menu.
Use the and buttons to
adjust the desired option.
12/24 Hour - Controls the clock display in either 12 or 24 hour format.
DD/MM - Sets the order in which the date and month are displayed.
LCD Brightness - Controls the LCD brightness level; Bright, dim or off.
(Set) Menu Title Exit
Fav-1Shift
Configure 12/24 Hour DD/MM LCD Brightness
18
Troubleshooting
If the LK10 becomes locked and/or ‘ERROR’ appears on the display due to a power
interuption or during cloning, follow these steps:
1. Unplug the power to the system and plug back in after one minute.
2. When the power resumes, the LK10 will display distorted text.
3. Clone the LR10 to the LK10 without entering Learn mode.
4. When the LR10 has finished sending, repeat Step 1.
Note: Time and date will not be updated in the LK10.
Important: LK10 will only operate when connected to KP10 as part of a complete AH10
hub-based system. It is not compatible with ‘Incognito Ready’ amplifiers.
Visit www.cambridge-audio.com and register to receive notification of future hardware and software
releases.
This guide is designed to make installing and using this product as easy as possible. Information in this
document has been carefully checked for accuracy at the time of printing; however, Cambridge Audio's
policy is one of continuous improvement, therefore design and specifications are subject to change
without prior notice. If you notice any errors please feel free to email us at: support@cambridgeaudio.com
This document contains proprietary information protected by copyright. All rights are reserved. No part of
this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior
written permission of the manufacturer. All trademarks and registered trademarks are the property of
their respective owners.
Incognito and Incognito Ready are trademarks of Cambridge Audio Ltd. All rights reserved.
© Copyright Cambridge Audio Ltd 2009
A-BUS and A-BUS Ready are registered trademarks of LeisureTech Electronics Pty Ltd Australia. This
product may be covered by one of more of the following patents: US 7,181,023, 6,389,139, EP 1004222,
AU 739808, NZ 502982, Mexico Z41196, Canada CA2301062.
19
LK10
ENGLISH
Cambridge Audio warrants this product to be free from defects in materials and workmanship (subject to
the terms set forth below). Cambridge Audio will repair or replace (at Cambridge Audio’s option) this
product or any defective parts in this product. Warranty periods may vary from country to country. If in
doubt consult your dealer and ensure that you retain proof of purchase.
To obtain warranty service, please contact the Cambridge Audio authorised dealer from which you
purchased this product. If your dealer is not equipped to perform the repair of your Cambridge Audio
product, it can be returned by your dealer to Cambridge Audio or an authorised Cambridge Audio service
agent. You will need to ship this product in either its original packaging or packaging affording an equal
degree of protection.
Proof of purchase in the form of a bill of sale or receipted invoice, which is evidence that this product is
within the warranty period, must be presented to obtain warranty service.
This warranty is invalid if (a) the factory-applied serial number has been altered or removed from this
product or (b) this product was not purchased from a Cambridge Audio authorised dealer. You may call
Cambridge Audio or your local country Cambridge Audio distributor to confirm that you have an unaltered
serial number and/or you purchased from a Cambridge Audio authorised dealer.
This warranty does not cover cosmetic damage or damage due to acts of God, accident, misuse, abuse,
negligence, commercial use, or modification of, or to any part of, the product. This warranty does not cover
damage due to improper operation, maintenance or installation, or attempted repair by anyone other than
Cambridge Audio or a Cambridge Audio dealer, or authorised service agent which is authorised to do
Cambridge Audio warranty work. Any unauthorised repairs will void this warranty. This warranty does not
cover products sold AS IS or WITH ALL FAULTS.
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE THE EXCLUSIVE REMEDY OF
THE CONSUMER. CAMBRIDGE AUDIO SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY IN THIS PRODUCT. EXCEPT TO THE
EXTENT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND
IMPLIED WARRANTIES WHATSOEVER INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PRACTICAL PURPOSE.
Some countries and US states do not allow the exclusion or limitation of incidental or consequential
damages or implied warranties so the above exclusions may not apply to you. This warranty gives you specific
legal rights, and you may have other statutory rights, which vary from state to state or country to country.
For any service, in or out of warranty, please contact your dealer.
Limited warranty
© 2009 Cambridge Audio Ltd
www.cambridge-audio.com
Cambridge Audio is a brand of Audio Partnership Plc
Registered Office:
Gallery Court, Hankey Place,
London SE1 4BB, United Kingdom
Registered in England No. 2953313
AP20830/2
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cambridge Audio Incognito LK10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cambridge Audio Incognito LK10 in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cambridge Audio Incognito LK10

Cambridge Audio Incognito LK10 User Manual - German - 20 pages

Cambridge Audio Incognito LK10 User Manual - Dutch - 20 pages

Cambridge Audio Incognito LK10 User Manual - Danish - 20 pages

Cambridge Audio Incognito LK10 User Manual - French - 20 pages

Cambridge Audio Incognito LK10 User Manual - Italian - 20 pages

Cambridge Audio Incognito LK10 User Manual - Spanish - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info