763804
7
Zoom out
Zoom in
Previous page
1/8
Next page
7
PROGRAMMING DISC PLAY
1. Ensure that a disc is loaded and the player is in standby mode.
2. Press PROGRAM/REPEAT. The Program setup will appear in the
display
3. Using the shuttle switch or the remote handset skip to the track number
that you want to program as your first track.
4. Press PROGRAM/REPEAT. The desired track is now entered and the
program number increases by one.
5. Repeat steps three & four until all your desired tracks are entered.
6. Press PLAY. The programmed tracks will play.
7. You can use the skip & search functions to move through your
programmed selection in the same way as normal playback.
8. Pressing STOP at any time will wipe the program and return the player
to standby mode.
USING NUMERICAL KEYS (OPERATION FROM REMOTE
HANDSET)
You can use the numerical keys on your supplied remote handset to
choose tracks.
1. Ensure that a disc is loaded. The player can be in standby mode or
playing.
2. Simply press the number of the desired track and the player will play
the disc from the start of that track.
3. If the track number required is greater than ten and less than twenty,
press +10 followed by the second digit of the number. If the track
number required is between twenty and twenty-nine, press +10 twice
followed by the second digit of the number.
TROUBLESHOOTING GUIDE
THERE IS NO POWER
Ensure that the AC power cord is connected securely.
Ensure that the plug is fully inserted into the wall socket and is switched
on.
Check fuse in the mains plug or adaptor.
THE PLAYER WILL NOT READ THE DISC
Check the disc is not loaded upside down.
Check that the disc is not too scratched or dirty
THERE IS NO SOUND
Ensure that the amplifier is set correctly
Check that the interconnects are inserted correctly
THE DISC IS SKIPPING
Check that the disc is not too scratched or dirty
Ensure that the player is on a firm surface and is not subject to vibrations
THERE IS A HUM COMING FROM THE SPEAKER
Ensure that all cable connections are secure
REMOTE HANDSET WILL NOT FUNCTION
Check that the batteries have not expired
Ensure that the signal is reaching the CD player
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cambridge Audio D100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cambridge Audio D100 in the language / languages: English as an attachment in your email.

The manual is 0,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info