656745
11
Zoom out
Zoom in
Previous page
1/16
Next page
851Dazur
11
ENGLISH
Pre-amp mode
The 851D can optionally be used as a digital pre-amp and connected
directly to a suitable power-amp.
To ensure that the Pre-Amp mode is selected, press the Menu button
then select the Pre-Amp item.
SETTINGS
USB 2
Pre-Amp
Front IR
Bright
Source
Trigger
APD OFF
Balance
Once Pre-Amp is enabled, the handset Volume Up and Down buttons
and the Volume knob on the front panel will affect the signal output level
from the 851D. A Balance (Channel Balance) option is also available in
the menu structure.
The level at both the balanced XLR and single-ended Phono/RCA
outputs is affected and either connection type can be used, see previous
‘Balanced’ and ‘Unbalanced’ diagrams.
To disable the Pre-Amp mode, select the button again and a display will
ask you to conrm your selection.
PreAmp ?
Disable
Yes
No
Press the Yes button to conrm.
Be careful not to disable the Pre-Amp when connected to a power
amplier in this way, as this returns the output level to an un-adjustable
maximum level for use only into an integrated amplier or pre-amplier
with its own volume control.
Balance
When the 851D is in Pre-Amp mode, the Balance menu item will be
available. Press the Balance menu item button to enter the balance
mode.
SETTINGS
USB 2
Pre-Amp
Front IR
Bright
Source
Trigger
APD 30m
Balance
BALANCE will appear on the display and can be adjusted using the
volume control.
BALANCE
This allows adjustment of the relative level between left and right
channels for circumstances where one speaker is further away than the
other or the source material itself has a channel imbalance.
Front IR
Used in conjunction with Custom Installation (C.I.) systems or IR repeater
systems. It may be desirable to disable the front panel IR by setting Front
IR to off, go to Settings menu and press the Front IR button to turn off
(the solid circle should not show).
SETTINGS
USB 2
Pre-Amp
Front IR
Bright
Source
Trigger
APD OFF
LCD brightness
In the Settings menu, press the Bright button to scroll through bright/
dim/off settings for the front panel display.
SETTINGS
USB 2
Pre-Amp
Front IR
Bright
Source
Trigger
APD OFF
Trigger out
In the System settings menu, press the Trigger input select button to
enter the submenu.
SETTINGS
USB 2
Pre-Amp
Front IR
Bright
Source
Trigger
APD OFF
The functions are:
AlwaysOn – Trigger will always be enabled when unit is not in standby.
BySource Trigger will be enabled when a source is selected. Sources
can individually be selected: Input 1–4, BNC, AES/EBU, Bluetooth and
USB. To select this function, press the Sources button then select the
trigger source/s.
TRIGGER
BySource
Phones
Sources
TRIG SRC
Input 1
Input 2
Input 3
Input 4
BNC
AES/EBU
BTooth
USB
Phones – When this mode is enabled, trigger output will be disabled
when headphones are plugged in.
Auto Power Down (APD)
This product has APD (Auto Power Down) enabled as default. After
inactivity of 30 minutes, the product will automatically switch to Standby.
Changing the default settings can be done by going to the Settings menu
and by pressing the APD item button to cycle through the different
options. The options are: 2hrs, 1hr, 30 minutes and Off.
SETTINGS
USB 2
Pre-Amp
Front IR
Bright
Source
Trigger
APD 30m
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cambridge Audio AZUR 851D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cambridge Audio AZUR 851D in the language / languages: English as an attachment in your email.

The manual is 8,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cambridge Audio AZUR 851D

Cambridge Audio AZUR 851D User Manual - German - 16 pages

Cambridge Audio AZUR 851D User Manual - Dutch - 16 pages

Cambridge Audio AZUR 851D User Manual - French - 16 pages

Cambridge Audio AZUR 851D User Manual - Italian - 16 pages

Cambridge Audio AZUR 851D User Manual - Polish - 16 pages

Cambridge Audio AZUR 851D User Manual - Swedish - 16 pages

Cambridge Audio AZUR 851D User Manual - Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info