656755
29
Zoom out
Zoom in
Previous page
1/40
Next page
751R V2azur
29
ENGLISH
The 751R V2 supports an Audio Return Channel (ARC) function from TVs that
also support this function (which must feature an HDMI1.4 input and have
actually implemented the ARC feature, see your TVs manual).
ARC allows a TV to send audio back down its incoming HDMI lead to the
751R V2's HDMI A output socket.
This function allows the 751R V2 to play back the audio from a TVs built-in
terrestrial cable or satellite tuner whilst you watch it's picture.
Using ARC
The ARC must rst be enabled in the Advanced Audio Setup menu.
Advanced Audio Setup
Multi Ch.Out :
HDMI Bypass :
TV ARC(HDMIA) :
Auto Power Down :
Pre Out
Normal
Enable
Enable
Return I/O
ARC can be started in one of two ways. If your TV supports it there may be a
menu item to start ARC on your TV.
Your TV then sends commands to the 751R V2 which cause it to start an ARC
session and 'TV-ARC' will appear on the front panel display automatically.
Some TVs may also start an ARC session whenever you select the in-built
tuner and stop when you select another source.
Alternatively you can start ARC by pressing the Aux/TV button twice on the
751R V2 (as long as TV-ARC has been enabled in the 751R V2's OSD which
is the default setting).
The rst press selects Aux, the second selects ARC and 'TV-ARC' appears on
the front panel display. The 751R V2 will then send commands to the TV over
HDMI to try to start an ARC session.
To nish ARC simply disengage it on your TV or press a different source
button on the 751R V2.
Picture adjustment
For sources that have had the Scaler set to Process the 751R V2 can provide
some picture adjustments.
These adjustments are remembered source by source.
Pressing a source for which the scaler is in Bypass will do nothing.
Pressing a source for which the scaler is set to Process will bring up the rst
adjustment item, shown at the bottom of the screen as below:
Contrast: +41
1. Press the Tuner FM/AM button on the front panel or remote control to
select Tuner mode.
2. Press the Tuner FM/AM button again to select FM or AM if desired.
3. Press the Mode/Store button on the front panel (or Mode button on the
remote control) to select automatic tuning, manual tuning or preset mode.
4. Press the Tuning + and Tuning - buttons (or the left and right arrow buttons
on the remote) to select the station you want to listen to.
In automatic tuning mode the unit scans to the next strong station. In manual
tuning mode the user can step manually through the frequencies. In preset
mode the unit cycles through the presets only.
Two FM modes are available, stereo and mono - Press the Stereo Mono
button on the remote to alternate between Stereo mode and Mono mode. If
the Display button is pressed, the RDS station names of FM stations will be
displayed if available.
Storing stations
1. Tune in a station you wish to store as explained previously.
2. Press and hold the Mode/Store button (or use the Store button on the
remote) for 5 seconds.
3. Use the Tuning +/- buttons to select a preset station number (1-15). The
station number will be displayed on the screen.
4. Press the Mode/Store button (or use the Store button on the remote) to
memorise the frequency.
Radio Data Systems (RDS)
RDS is a method for the transmission of additional information from local
radio stations. It is only available in FM mode. RDS will only work if the
local broadcasting stations have RDS transmission and the signal is strong
enough.
Press the Info button on the remote and go through the displayed functions.
There are functions for PS, PTY, CT and RT:
PS (Station Name)current station name will be shown
PTY (Program Type)current name type of the program will be shown
CT (Clock/Time) – current time from Radio Station will be displayed.
Note: Clock/Time will be only transmitted from local radio station once a
minute. If the Clock - Time is not available the message "NO CT" will appear
briey on the display.
RT (Radiotext) – Radiotext messages will be shown, if available.
Lip sync
The 751R V2 can if required apply a small delay to the audio playback to
resynchronise it to any video playback which appears to be behind the audio
in time.
This can sometimes happen if the video is slightly delayed by a player or TV
performing a lot of video processing.
Pressing the Lip Sync button on the remote will bring up the
current Lip Sync value on the 751R V2's main display and allow
adjustments in 10mS (10 thousandths of a second) increments.
Setting the Lip sync value to 0 causes Lip Sync delay to be turned off.
Note: The Lip sync value is stored and recalled separately for each source.
Using the tuner Audio Return Channel
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cambridge Audio Azur 751R V2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cambridge Audio Azur 751R V2 in the language / languages: English as an attachment in your email.

The manual is 12,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cambridge Audio Azur 751R V2

Cambridge Audio Azur 751R V2 User Manual - German - 40 pages

Cambridge Audio Azur 751R V2 User Manual - Dutch - 40 pages

Cambridge Audio Azur 751R V2 User Manual - French - 8 pages

Cambridge Audio Azur 751R V2 User Manual - Italian - 40 pages

Cambridge Audio Azur 751R V2 User Manual - Polish - 40 pages

Cambridge Audio Azur 751R V2 User Manual - Spanish - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info