Video games console/
Video camera outputs
The front panel Video 3 input is for temporary connections to video
games consoles etc. Remove the cap to access the Video 3 inputs, and
connect to a video game console or video camera’s outputs using stereo
phono cable (RCA-RCA) and either (1) Composite or (2) S-Video cable,
depending on what your unit supports (S-Video preferred).
If your games console has an optical digital output this can also be used,
allowing the 640R to decode surround sound information if the
console/game supports it.
Composite video cable
Stereo
phono
cable
(RCA-
RCA) S-Video cable
Optical cable (OPT-OPT)
FM aerial
Connect an aerial to the FM 75 ohm socket (a simple wire aerial is
supplied only for temporary use). Extend the lead and move the aerial
around until you get the best reception. For continued use, we strongly
recommended using a 75ohm outdoor FM aerial.
AM loop aerial
Connect each end of the single length antenna to the antenna
terminals. Place the antenna as far from the main system as possible to
prevent unwanted noise and to obtain optimum reception. If the AM loop
aerial provided does not receive sufficient reception, it may be
necessary to use an outdoor AM aerial.
Aerial connections
