656752
15
Zoom out
Zoom in
Previous page
1/28
Next page
551R V2azur
15
ENGLISH
ENGLISH
Once nished the unit will display a screen similar to the one below reporting
which speakers were found and any that appear out of phase.
azur 551R
Continue : [ENTER]
The speakers that have been
found are:
L C R SL SR LB RB SW
All speakers are in phase
If any speakers appear unconnected or out of phase carefully check the
connections on the speaker and the back of the unit. Also check any bi-wiring
links that might be present on the speaker. For any out of phase speakers
check that the relevant + terminal of the 551R V2 goes to the + terminal
of that speaker and similarly the terminal of the 551R V2 goes to the
terminal of the speaker for that channel.
If necessary press the OSD button to perform a retest or press Enter to start
the second part of the auto setup procedure as below.
azur 551R
The unit is now measuring the
Distance and Level settings for
your speakers
Please wait....
Again a series of test signals will now be output from all of the connected
speaker terminals and Subwoofer. The 551R V2 uses these to measure the
levels and distances (and hence introduce the correct delays) appropriate to
your speakers and room characteristics.
When the auto setup of the 551R V2 is completed successfully, the 551R V2
will return to the Auto Setup Menu.
azur 551R
Video In. Select
Audio In. Select
Tone/Sub Config.
Speaker Config.
Speaker Distance
Speaker Level
Speaker Xover
Auto Setup
Advanced Setup
OSD Setup
Please press ENTER to start
auto setup.
WARNING: High Volume Test Tones
Quit: [I/O] Enter: [ENTER]
The Speaker Distance and Level Calibration settings for each speaker will
have been updated.
It is of course now possible to go into the Speaker Delay and Level
Calibration menus if you want to manually check/adjust the settings made by
the CAMCAS system, and it is always advisable to check them as no system
can be totally foolproof.
To exit the auto setup menu of the 551R V2 continue to press the OSD
button on the remote control to exit all menus or until 'OSD 'is no longer
displayed on the front panel. You can now unplug the microphone and put
it away for future use.
Note:
If the auto setup of the 551R V2 is unsuccessful for some reason a 'Fail'
message will appear on the OSD. Included in this message will be details
of the speaker channel or channels which have not been successfully
adjusted. If this is the case, please again check that the speaker or
speakers detailed in the OSD as 'failed' are connected correctly & have
not been wired out of phase. Also check the microphone connection and
any other external issues that could have affected the tests such as noise
in the room etc.
Like all such systems CAMCAS has some limitations. Speakers that exhibit
very strong phase angles or deliberately wire some drive units out of phase
can of course appear to the system as an out of phase speaker when
correctly connected. If a speaker is reported as out of phase but is correctly
wired please consult the speakers manufacturer in case this is the case.
Similarly bi-polar speakers which radiate in more than one direction can
make it difcult to measure the distance and sometimes level accurately as
you might expect.
In all cases it is always advisable to manually check the settings CAMCAS has
made for a 'reality check' to ensure there are no obvious errors.
3. Assigning Video inputs
The 551R V2 has 6 HDMI (High Denition Multi-Media Interface) inputs,
and 2 HDMI outputs. HDMI is a fully digital audio/video system for picture
and audio in digital format for best possible picture quality. DVI (Digital
Video Interface) is a subset of HDMI that uses different connectors and only
supports digital video (no audio). The 551R V2 is compatible with DVI in that
simple passive DVI-HDMI adaptors are available which allow the conversion
of the DVI connector to an HDMI format connector (and back again if
required) for routing via the 551R V2.
HDMI outputs on Blu-ray, DVD players and Set-top boxes also often support
higher resolution formats including progressive scan types. Consult both your
HDMI source and TV manuals for details, it is often possible to select from
various options, you will want to select the highest quality output that both
your source and TV are compatible with.
From Blu-ray players, HDMI can also carry the latest Dolby Digital Plus and
True-HD formats as well as DTS-HD High Resolution and Master Audio.
Ensure that the HDMI output of your player has been set to 'Bitstream' or
'Raw' to pass the formats to the 551R V2 for decoding.
Also some Blu-ray players feature settings to allow down conversion of Dolby
Digital Plus etc. to backwards compatible Dolby Digital 5.1 for older AV
receivers which do not support these formats.
Ensure any such settings are disabled to allow our 551R V2 access to all
the latest formats.
For all the above reasons HDMI is the preferred connection method for both
Audio and Video.
Select the Video In. Select menu.
For each source the currently selected video input type will be shown. It is
possible to assign any of the video input sockets to each source in turn,
except Tape/MD/CDR source which is audio only.
The Options are HDMI 1, HDMI 2, HDMI 3, HDMI 4, HDMI 5 and HDMI 6.
azur 551R
Video In. Select
Audio In. Select
Tone/Sub Config.
Speaker Config.
Speaker Distance
Speaker Level
Speaker Xover
Auto Setup
Advanced Setup
OSD Setup
BD/DVD
CD/Video 1
Video 2
Video 3
Aux/TV
7.1 Direct
Back: [I/O]
HDMI 1 < >
HDMi 2 < >
HDMi 3 < >
HDMi 4 < >
HDMi 5 < >
HDMi 6 < >
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cambridge Audio Azur 551R V2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cambridge Audio Azur 551R V2 in the language / languages: English as an attachment in your email.

The manual is 5,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cambridge Audio Azur 551R V2

Cambridge Audio Azur 551R V2 User Manual - German - 28 pages

Cambridge Audio Azur 551R V2 User Manual - Dutch - 28 pages

Cambridge Audio Azur 551R V2 User Manual - French - 28 pages

Cambridge Audio Azur 551R V2 User Manual - Italian - 28 pages

Cambridge Audio Azur 551R V2 User Manual - Polish - 30 pages

Cambridge Audio Azur 551R V2 User Manual - Spanish - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info