497534
12
Zoom out
Zoom in
Previous page
1/22
Next page
12
Note: This setup is very important as the 351R will also automatically use
this information to select appropriate Dolby and DTS decoding modes
dependant not only on the source material but also the speaker package
it knows you have.
To tell the unit the type of package you have, turn on the On-Screen Display
via the remote button as shown. Highlight the 'Speaker Cong.' menu by using
volume and on the remote then go to it by pressing Enter:
Now move down and by highlighting each speaker in turn and using the Left
and Right arrows select from 'Large' or 'Small' for each speaker. 'Large' or
'Small' are used to describe each speaker in terms of bass response, they do
not necessarily reect the actual physical size of the speaker.
Large = Speakers with an extended low frequency response of approximately
20-40Hz to 16-20kHz (oorstanders or high quality larger stand-mounted
speakers).
Small = Speakers with a less extended low frequency response of
approximately 80-100Hz to 16-20kHz (small stand-mounted, bookshelf or
satellite speakers).
Setting each speaker allows the 351R to perform what is called Bass
Management and to direct low frequency bass from music and the Low
Frequency Effects channel of surround sound material to those speakers
best able to reproduce it. If you do not wish to use any of the speakers set its
setting to 'None'.
The Subwoofer output can also be set to On or Off. If no sub is being used
make sure this setting is set to Off to allow the 351R to re-direct the bass
information in this channel to other speakers.
Note: The 351R will force some speakers to certain settings in the following
circumstances!
The Front Left and Right speakers may be 'Large' or 'Small' but not 'No' as
they are always required for any type of music/movie reproduction.
Bass must always be reproduced by either the Front Left and Right or
Subwoofer channel (or both). Setting the Front Left and Right to 'Small' will
result in the Subwoofer automatically being set to 'Yes'. Setting the Subwoofer
to 'No' will automatically result in the Front Left and Right being set to 'Large'.
If the Front Left and Right cannot reproduce low frequency bass a Subwoofer
must be used. i.e. If the Front Left and Right are set as 'Small' the Sub must
be Set to 'Yes'.
Also, setting the Front Left and Right as 'Small' will always set the other
speakers as 'Small' (and the Sub to 'Yes'). This is because LFE/ bass
information should not be redirected to the surround channels.
To store the setting simply come back out of the OSD (pressing the
button
always moves back one menu item, and then exits and stores from the main
menu screen).
The setup of the 351R is a reasonably simple 3 stage process. The speaker
setup process (stage 2.) can either be performed manually or via the CAMCAS
(Cambridge Audio Microphone Controlled Auto Setup) procedure.
The procedure is as follows:
1. Speaker conguration.
2. Speaker setup (Speaker delay and Level calibration)
3. Source setup
1. Speaker conguration
First tell the unit what kind of speaker package you have. The 351R can
support up to a 5.1 speaker setup which means 5 speakers (Front Left,
Front Right, Centre, Surround Left, Surround Right, ) plus a mains powered
Subwoofer (the .1).
Refer to the diagram above for a typical example of a 5.1 loudspeaker setup.
Always adjust the speakers and listening positions until you are happy with
the sound. Please refer to your loudspeaker and subwoofer manuals for more
detailed positioning information.
1. Front Left and Right speakers
For stereo and multi-channel sound.
2. Centre speaker
For dialogue and centre sounds. Ideally position at a similar height to the
front left and right speakers (above or below the TV/monitor). Using a centre
speaker from the same manufacturer/range as used for the front left and
right speakers is advisable. This "timbre matching" allows surround effects
to ow more naturally from left to right without obvious transitions between
the speakers.
3 Surround Left and Right speakers
For ambient and multi-channel sound. Floorstanding speakers should be
angled towards the listening position. Bookshelf/standmount speakers
should be wall mounted or used with dedicated speaker stands, positioned
at or above ear height.
4 Subwoofer
For improving the bass in your system, as well as reproducing dedicated LFE
(Low Frequency Effects) cinema effects when playing Dolby Digital or DTS
encoded discs. Your subwoofer can often be placed almost anywhere in
the room as bass is less directional, but experimentation with positioning is
recommended.
In each case the 5.1 in fact relates to the maximum number of speakers that
can be used, as the Centre, Sub and Surround speakers can all be deleted
if required (although of course performance is reduced). For example, if you
choose not to use a Centre Channel speaker you can set this to 'None' in the
settings, as shown later and the 351R will automatically redirect the centre
channel audio information into the Left and Right Front channels, creating
what is known as a 'Phantom Centre'.
Similarly, you might decide not to use a subwoofer if your main Left and Right
speakers are capable of reproducing enough bass for a satisfying music/
movie experience. The 351R will then automatically re-direct the bass from
the Subwoofer/Low Frequency Effect channel to the Left and Right Front
Speakers.
351R setup
azur 351R
Audio In. Select
Tone/Sub Config.
Speaker Config.
Speaker Distance
Speaker Level
Speaker Xover
Auto Setup
Dolby/DTS Setup
OSD Setup
Front L/R
Center
Surr. L/R
Subwoofer
Quit : [I/O] Enter : [ENTER]
Large <>
Small <>
Small <>
On <>
1 1
3 3
4
2
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cambridge Audio Azur 351R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cambridge Audio Azur 351R in the language / languages: English as an attachment in your email.

The manual is 6,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cambridge Audio Azur 351R

Cambridge Audio Azur 351R Additional guide - English - 2 pages

Cambridge Audio Azur 351R User Manual - German - 22 pages

Cambridge Audio Azur 351R User Manual - Dutch - 22 pages

Cambridge Audio Azur 351R User Manual - French - 22 pages

Cambridge Audio Azur 351R User Manual - Italian - 24 pages

Cambridge Audio Azur 351R User Manual - Polish - 22 pages

Cambridge Audio Azur 351R User Manual - Swedish - 22 pages

Cambridge Audio Azur 351R User Manual - Spanish - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info