581025
10
Zoom out
Zoom in
Previous page
1/40
Next page
10
1 Output channel indicators
Shows the currently active channels depending on decoding mode and
source material. Icons lit indicate channels being output by the 751R V2.
Z2
Indicates Zone 2 is active (on).
Room EQ
Indicates Audyssey 2QE® is enabled.
2 Decoding mode indicators (PCM, Dolby Digital, DTS
etc)
Shows the current decoding mode, Dolby Digital, DTS etc. In conjunction
with the Output Channel indicators these give full details of the current
processing mode.
Direct indicator
Lights when the 751R V2 is in a Direct mode - Analogue Stereo Direct or
7.1 Direct.
3 Main information display
Shows the current source selected, also the surround mode and station
name/frequency when in tuner mode etc.
4 Mode icons
HDMI
Indicates the current source audio input type is HDMI.
Digital/Analogue indicators
Indicates whether the current source audio input type is Digital (S/P DIF/
Toslink) or Analogue.
Display examples
Indicates a 5.1 Dolby Digital source being played back as 5.0 (Sub off).
Indicates a 7.1 playback of DTS-HD Master material.
Indicates a 2.1 output created in the digital domain from analogue input
material.
Front panel display
SL SW SR
SBL SBR
DIRECT
Bi AMP
RoomEQ
LH RH
96/24
Dynamic
MSTR
DTrueHD
EXPL
Vol
xz
Audyssey
EQ
ES
HR
Exp
Neo:6 X
Z2
C
ANALOG DIGITAL
MUTING
USB
TUNEDFMSTEREO
AUTO
HDMI
2 4
3
To avoid damaging the speakers with a sudden high-level signal, be sure to
switch the power off before connecting the speakers. Check the impedance
of your speakers. Speakers with an impedance of 8 ohms (each) are
recommended.
The coloured speaker terminals are positive (+) and the black speaker
terminals are negative (-). Make sure correct polarity is maintained at each
speaker connector or the sound can become weak and "phasey" with little
bass.
Prepare the speaker cords for connection by stripping off approximately
10mm (3/8") or less (no more than 10mm, as this could cause a short-
circuit) of the outer insulation. Twist the wire tightly together so there are no
loose ends. Unscrew the speaker terminal knob, insert the speaker cable,
tighten the knob and secure the cable.
Note: All connections are made via loudspeaker cable, except if using an
active subwoofer which would be connected via a standard RCA phono cable.
Banana Plugs (4mm standard) connected to the speaker cable are
recommended for direct insertion into the speaker terminals.
Please refer to the 'Speaker Conguration' section of this manual for more
information on 5.1 and 7.1 speaker setups.
Loudspeaker connections
Front
speakers
Surround
speakers
Centre speaker
Surround back
speakers
Powered subwoofer
Phono/RCA cable
1
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cambridge 751RV2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cambridge 751RV2 in the language / languages: English as an attachment in your email.

The manual is 12,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cambridge 751RV2

Cambridge 751RV2 User Manual - German - 40 pages

Cambridge 751RV2 User Manual - Dutch - 40 pages

Cambridge 751RV2 User Manual - French - 40 pages

Cambridge 751RV2 User Manual - Italian - 40 pages

Cambridge 751RV2 User Manual - Polish - 40 pages

Cambridge 751RV2 User Manual - Swedish - 40 pages

Cambridge 751RV2 User Manual - Spanish - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info