Manual Calor gv 7350 express (page 20 of 134) (All languages)

323850

Zoom out

Zoom in

1/134

o transport your steam generator using the handle of the iron :

- place the ironin positionon the housingplate onthesteam generator and fold the ringover the

iron until it locks into position (you will hear a “click”) - fig.2.

Hold the iron by the handle to transport your steam generator - fig.1.

What water may be used ?

• Your iron has been designed to operate using untreated tap water.

• Heat concentrates the elements contained in water during evaporation. The types of water

listed below contain organic waste or mineral elements thatcan cause spitting, brownstaining

or premature wear of the appliance: water from clothes dryers, scented or softened water,

water from refrigerators, batteries or air conditioners, pure distilled or demineralised water or

rain water should not be used in your iron. Also do not use boiled, filtered or bottled water.

f your water is very hard(check

with your local water authority)

it is possibleto mix untreated

ap water with store-bought

distilled ordemineralised water

in the following proportions:

50% untreatedtap water,50%

distilled ordemineralised water.

Preparation

Filling the water tank

• Place the steam generator on a stable, horizontal and heat-resistant surface.

• Ensure that your steam generator is unplugged and that the soleplate and the iron rest have

cooled down.

• Open the water tank filler cover - fig.4.

• Pour in untreated tap water up to the max mark - fig.5.

• Close the water tank filler cover.

• Your iron is equipped with an extension cord system to prevent the cord from dragging over

the laundry and creasing it again when ironing.

• Take the steam cord out of its housing and unwind it completely.

• Remove the tie to release the cord outlet.

• Press the Eject button - fig.6 and the Easycord system extends automatically.

• When the cord outlet tips, the Easycord system extends automatically without you having to

press the Eject button.

Using the Easycord system

Operating the control panel

• Green light flashes: the boiler heats up. - fig.7.

• Green light on: the steam is ready - fig.7.

• Red light “water tank” on: the water tank is empty - fig.10.

• The orange “anti-calc” indicator flashes - fig.12: you need to rinse the scale collector.

Switch on the steam generator

• Completely unwind the power cord and the steam cord from its storage space.

• Lower the retaining hoop (depending on model) to unlock the safety catch - fig.3.

• Plug your steam generator into a mains socket with an earth pin”.

• Press on the on / off switch. The green light (located on the control panel) flashes and the

boiler heats up - fig.7.

When the green “steam ready” light stops flashing (after 2 minutes approximately), the

appliance is ready.

The first time the appliance is

used, there may be some

fumes and smell but this is

not harmful. They will not

affect use and will disappear

rapidly.

Steam ironing

• Placetheiron'stemperaturecontrolslideaccordingtothetypeoffabrictobeironed (seetablebelow).

• The thermostat light comes on. Be careful ! The steam generator is ready when the thermostat

light goes out and when the green “steam ready” light stays on.

• Adjust the steam output control dial (located on the control panel).

• While ironing, the light on top of the iron and the steam ready light turn on and off, as the

temperature adjusts without interrupting ironing.

• To obtain steam, press on the steam control button under the iron handle and keep it pressed -

fig.8. The steam will stop when you release the button.

• When starting, and regularly while it is being used, your steam generator's electric pump injects

waterinto the boiler. It makes a noise but this is quite normal. You may also heara clicking noise

which is the steam valve opening. Again this is normal.

• Always spray starch onto the reverse side of the fabric to be ironed.

Use

Do not place the iron on a

metal support.When

taking a break from

ironing, always place

the iron on the iron rest

plate of the unit. It is

equipped with non-slip

pads and has been

designed to withstand

high temperatures.

Always use the Easycord

system for enhanced

comfort of use.

Ironing Boards:

ue to the powerful steam

output, a mesh type ironing

board must be used to allow

ny excess steam to escape

and to avoid steam venting.

1800115593 TEFAL ExpressAnticalc:1800115593 5/02/09 11:36 Page 20

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Calor gv 7350 express in the language / languages: All languages as an attachment in your email.

The manual is 3,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Calor gv 7350 express

Calor gv 7350 express User Manual - German, Dutch, French - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Calor gv 7350 express Manual

Product: