323957

Calor gv 7260 Manual

22
Zoom out
Zoom in
Previous page
1/134
Next page
22
Easy descaling of your steam generator:
Toextendthe life of your steam generator and avoid scale onyourironing, your steam generator
is equipped with a built-in scale collector. This valve, located in the tank,
a
utomatically removes the scale that forms inside.
Operation:
•
An orange “anti-scale” light locatedon the control panel starts blinking totell you that the anti-
scale valve needs rinsing - fig.12.
Important: This operation must not be carried out unless the steam generator has
been unplugged for at least two hours and has cooled down completely.
To carry out this operation, the steam generator must be close to a sink as water may
come out of the tank when it is opened.
• Oncethesteam generatorhas cooled down completely,remove thescale collector cover - fig. 13.
• Unscrew theanti-scalevalveand remove it from the housing;it contains the scale that has built
up in the tank - fig.14 and fig.15.
• To clean the valve properly, just rinse it under running water to remove the scale it contains -
fig.16.
• Put the valve back into its housing and screw it in completely to keep it watertight - fig.17.
• Refit the scale collector cover - fig. 18.
The next time you use your iron, press the “restart” button on the control panel to turn
off the orange “anti-scale” light.
D
o not use any descaling
substances (vinegar,
industrial descaling
p
roducts, etc.) when rinsing
the anti-scale valve :
they could damage it.
B
efore emptying your steam
generator, it must always be
left to cool for 2 hours to
avoid any risks of scalding.
Storing the steam generator
• Press the illuminated on/off switch and unplug the generator.
• Place the iron on the housing plate on the steam generator.
• Raise the retaining hoop over the iron until it locks into place (audible click) - fig.2.
• Your iron is then safely retained on its base. Warning: do not touch the soleplate while still hot.
• Slot the extension cord outlet in the notch (depending on model). Take the end of the cord support and
press to return the flexible part into the base.
• Store the steam cord in its slide storage place - fig.19. Take it, fold it in two so as to make a loop. Put the
end of this loop in the slide storage place then push gently until you see the end on the other side of the
slide storage place - fig.20.
• Leave the steam generator to cool for at least one hour before putting it away if it is to be stored in a
cupboard or confined space.
• You can store the steam generator in complete safety.
PROBLEMS CAUSES SOLUTIONS
The steam generator does not switch on
or the iron indicator and ON/OFF
indicator do not switch on.
The appliance is not switched on.
Check that your appliance is correctly
plugged in and press the illuminated
on/off switch.
Water runs out of the holes in the
soleplate.
Water has condensed in the pipes because
youare usingsteam forthefirsttimeoryou
have not used it for sometime.
Press on the steam control button away
from your ironing board until the iron
produces steam.
The soleplate is not hot enough.
Decrease the steam output while ironing
atlow temperature (steam output control
dial on the control panel). Wait for the
thermostat light to go out before
activating the steam control button.
Your thermostat is faulty: the iron is not
hot enough.
Contact an Approved Service Centre.
Water streaks appear on the linen.
Your ironing board cover is soaked with
water as it is not suited to the power of a
steam generator.
Check that your ironing board is suitable
(See page 20).
Problems with your steam generator?
1800115593 TEFAL ExpressAnticalc:1800115593 5/02/09 11:36 Page 22
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Calor gv 7260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Calor gv 7260 in the language / languages: All languages as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Calor gv 7260

Calor gv 7260 User Manual - German, Dutch, French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info