699193
9
Zoom out
Zoom in
Previous page
1/12
Next page
Schematic diagram of installation and dismantling:
Schematic diagram of installation
1. The host will be placed as per the installation position before installing the host, which shall
connect to corresponding horn line and power line.
2. The host can be fixed after the host running effect is satisfactory.
Host installation
1. Install the support on the instrument board, and bend the part of support for positioning.
2. Connect the power line and horn line, and fix the stator on the vehicle.
3. Push the host into the support, and tighten the retaining nut of stator.
Host dismantling
Loosen the retaining nut of stator; Insert two dismantling key into the gap between the left and right
sides to make the key to grapple the host, then, pull out gently, after which, the host may be
removed from the support; Then, remove the power line and horn line, and unplug the antenna
plug.
Schematic diagram of installation and dismantling:
Schematic diagram of installation
1. The host will be placed as per the installation position before installing the host, which shall
connect to corresponding horn line and power line.
2. The host can be fixed after the host running effect is satisfactory.
Host installation
1. Install the support on the instrument board, and bend the part of support for positioning.
2. Connect the power line and horn line, and fix the stator on the vehicle.
3. Push the host into the support, and tighten the retaining nut of stator.
Host dismantling
Loosen the retaining nut of stator; Insert two dismantling key into the gap between the left and right
sides to make the key to grapple the host, then, pull out gently, after which, the host may be
removed from the support; Then, remove the power line and horn line, and unplug the antenna
plug.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caliber RMD050DAB-BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caliber RMD050DAB-BT in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Caliber RMD050DAB-BT

Caliber RMD050DAB-BT Quick start guide - English, German, Dutch, French, Swedish, Spanish - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info