781576

Caliber RDD788 Manual

12
Zoom out
Zoom in
Previous page
1/28
Next page
LOC
VOL 32
1
Radio operations
To select the radio mode
Press the button to access the
source interface, then press the or
button on the front panel or pressing the
or button on the remote control to select
select the radio mode. You will see the
following radio screen on the
one of the three
MODE
Stereo/Mono
◄
►
TFT screen.
In radio mode, press the button
repeatedly to select radio
broadcasting bands: FM 1-> FM 2 -> FM 3.
Press the or button, the automatic
search will start. It will search upward or
downward for the strong signal radio station
within the current band.
Press and hold the or button until
“MANU” appears on the TFT screen, it will
change into manual searching mode.
Press the or button repeatedly to
manually search upward or downward step
by step for the desired radio station within
the current band. For fast manual
searching, press and hold the or
button.
In manual search process, if the both
buttons haven’t been pressed within 5
seconds, it will change into automatic
search mode automatically. “MANU”
disappears on the TFT screen.
FM station is received in stereo mode.
However, if the signal weak or reception is
not as good as you would like, switching to
MONO mode usually improves the overall
sound quality
To select a radio band
Auto/ Manual tuning
BAND
- Automatic search mode:
- Manual search mode:
Press the button on the front panel or
briefly press on the remote control
to choose FM STEREO or MONO audio
effect.
In urban settings, most stations are strong
enough and it should be set in LOCAL
mode.
Switch to DX (distant) mode to search for
stations with weaker signals.
Press and hold the button on the
head unit or briefly press the button
on the remote control to choose local
reception or DX(distant) reception mode.
You can store up to a total of 18 FM radio
stations in the memory (manually or
automatically.
- Select a band (if needed)
- Select a station by or button, refer
to auto / manual tuning.
-HoldaPre-setbutton(1-6)foratleast2
seconds.
- Select a band (if needed).
- Press a preset button (1-6) briefly to
recall the stored station.
Press the button to scan each preset
station. It will play a station for a few
seconds, then go to next station until all 6
stations are scanned, finally the radio will
play at the preset station where scanning
started. The preset station number on the
LCD will flash during the process. When
you hear a station that you wish to listen to,
press the again to stop the preset
scanning.
Press and hold the button for more
than 2 seconds to start auto store. The radio
will scan from the lowest frequency, and
automatically store the 6 strongest stations
into the preset memories. When auto store
is complete, the radio will start preset scan
to the stored 6 station
ST
MO/ST
PTY/LOC
LO/DX
- To store a station:
- To recall a station:
- Preset scan:
AS/PS
AS/PS
- Auto store:
AS/PS
.
Local/Distant
To store / recall a preset radio stations
Auto store / Preset scan
Stereo/mono
Local/distant
Radio band
Frequency
Clock
Volume
Preset
station
number
TA AF
Page 10
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caliber RDD788 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caliber RDD788 in the language / languages: English as an attachment in your email.

The manual is 0.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Caliber RDD788

Caliber RDD788 Quick start guide - English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info