Manual Caliber RDAB10 (page 45 of 48) (English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish)

781578

Zoom out

Zoom in

1/48

2. Installation of The Device

Integrating this device with your existing car stereo system is simple and easy. Simply

connect both the existing FM antenna and DAB antenna to the device inputs, then the

FM-modulated DAB radio is readily available via its FM output (F female connector on the

other end of device). This paragraph is intended to guide you step by step how to

correctly configure this device with existing FM antenna, power source, and audio output

delivery to car stereo.

2.1 Connecting to the inputs

 Connect the existing FM/AM antenna (available from the car) to the port (a) of the

unit.

 Connect DAB antenna into the DAB antenna port (b) of the unit.

 Connect IR receiver to the IR port (c). The IR receiver “window” should be located at

positions that can maintain a line-of-the-sight for better command reception.

 Connect the wiring harness correctly to port (d) on the unit. This harness include

+12V car battery supply, ignition wire (ACC), and ground wire. Note that a separate

ISO connection cable may be provided to ease the connection.

2.2 Connecting to the output

In general cases, one simply need to Connect the device’s FM antenna output port (g) to

the car stereo’s FM input as depicted below. No extra wiring is needed. The received DAB

radio contents is already converted into FM signal and fed into the car stereo as a

commonplace FM station.

FM/AM antenna from car

DAB antenna

In.

IR receiver

In.

Battery +12V wire (yellow)

Ignition ACC wire (red)

Ground wire (black)

Wiring harness

(a)

(b)

(c)

(d)

Ear phone socket i.e. port (e) is another audio output option for car stereo to receive the

DAB contents. Note that the Mini USB port (f) is only for software upgrade of the unit. It

is intended for service professionals, not for general public.

Once completed, one can turn on the vehicle and the LED on IR receiver will be ON as a

“power ON” indication to remind users the power is running through the unit.

Note. Please make sure that the unit is fasten tightly and securely. If the unit is loose and dangling, it may

result in malfunction

1. Please make sure that all the wire connections are securely made by inserting jacks until they lock

completely.

2. If your vehicle’s ignition does not have an ACC position, or if the ignition wire is connected to a power

source with constant voltage such as battery wire, the power will not be linked with the ignition (i.e.,

it will not turn on and off along with the ignition). If you want to link the unit’s power with the ignition,

connect the ignition wire to a power source that can be turned on and off with the ignition key.

3. If the fuse blows, first make sure that the wires have not caused a short circuit, then replace the old

fuse with one with the same rating.

4. Insulate unconnected wires with vinyl tape or other similar material. To prevent short circuits, also do

not remove the caps on the ends of the unconnected wires of the terminals.

Ear phone socket

connects to audio

output)

Upgrade port (mini

USB)

FM output to the car

stereo

(e)

(f)

(g)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Caliber RDAB10 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 18.51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Caliber RDAB10 Manual

Product: