536914

Caliber RCD272DBTI Manual

5
Zoom out
Zoom in
Previous page
1/18
Next page
RCD 272DBTi MANUAL
6
Radio Data System
This unit has a built-in “Radio Data System”
decoder system that supports broadcast stations
transmitting “Radio Data System” data.
When using the “Radio Data System” function,
always set the radio to FM mode.
AF function
The AF function switches to a dierent frequency
on the same network in order to maintain
optimum reception.
* The factory default setting is ON.
1. Set to system setup by long pressing [ DISP ]
button.
2. Press the [
] or [ ] button to select “ AF ”.
3. Rotate the [ V OLU ME ] knob to select ON or
OFF.
• AF ON:
“AF ” indicator appears in the display and AF
function turns on.
• AF OFF:
“AF ” indicator disappears in the display and AF
function turns o.
REG (Regional programme) function
When the REG function is ON, the radio will
automatically tune into the station with the
the AF control. If this function is OFF and the
regional area changes as you drive, the radio will
tune into a station within the current region.
* The factory default setting is ON.
RADIO DATA SYSTEM OPERATIONS
Notes:
• This function is disabled when a national
station such as BBC R2 is being received.
• The REG function ON/OFF setting is valid
when the AF function is ON.
1. Set to system setup by long pressing [ DISP ]
button.
2. Press the [
] or [ ] button to select
“REG ”.
3. Rotate the [ VOLU ME ] knob to select ON or
OFF.
Manually tuning a regional station in the
same network
This function is valid when the AF function is
ON and the REG function is OFF.
Note:
This function can be used when a regional
broadcast of the same network is received.
In the TA standby mode, when a trac
announcement broadcast starts, the trac
announcement broadcast is received as top
priority regardless of the function mode so
you can listen to it. Trac programme (TP)
automatic tuning is also available.
* This function can only be used when “ TP ”
appears in the display. When “ TP ” appears,
this means that the “Radio Data System”
broadcast station being received has trac
announcement programmes.
Setting the TA standby mode
If you press the [TA] button, “TA ” lights in the
display and the unit is set into the TA standby
“TRAF INF ” appears in the display. If you press
the [TA] button while a trac announcement
broadca st is being rec eived, the trac
announcement broadcast reception is cancelled
and the unit goes into the TA standby mode.
Cancelling the TA standby mode
As “ TA ” lights in the display, press the [TA]
button. The “ TA ” in the display goes o and the
TA standby mode is cancelled.
PTY (Programme Type)
This function enables you to listen to a
broadcast of the selected programme type even
if the unit is on a function mode other than radio.
* S ome countries do not ye t have PTY
broadcast.
* In the TA standby mode, a TP station has
priority over a PTY broadcast station.
Selecting PTY
Press [ MENU / ] button, then rotate the
[V OLU ME ] knob to select PTY type, press the
[VOLU ME ] knob, the unit begin searching.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caliber RCD272DBTI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caliber RCD272DBTI in the language / languages: English as an attachment in your email.

The manual is 5,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Caliber RCD272DBTI

Caliber RCD272DBTI Quick start guide - English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info