536913

Caliber RCD272BTI Manual

17
Zoom out
Zoom in
Previous page
1/18
Next page
RCD 272BTi
manual
• GB •
RCD 272BTi manual
3
PANEL CONTROLS
1. - Power / Mute
2. - Previous / next track
- Seek + / - (long press)
3. - SRC
- TUNER
- Disc play (when disc inserted)
- USB (when USB connected)
- AUX
- BLUETOOTH(when BT connected)
- iPod (when iPod connected)
4. - Sound effect setting
5. - Trafc announcement
6. - Band switch:
FM1 -> FM2 -> FM3 -> AM
- BT mode – Dial / Answer call
7. - RADIO mode – PTY select
- CD mode – No function
- BT mode – Phonebook
– Terminate call (during talking)
- AUX mode – No function
- iPod mode – iPod menu
- USB mode – Search function
8. - Scan play / Preset scan
- Auto store (long press)
9. - Adjust volume level / Conrm (press)
10. - Display switch
- System setup (long press)
11. - Button 1: Play / Pause / Top play (long press)
/ Preset station 1
- Button 2: Scan play / Preset station 2.
- Button 3: Repeat play / Preset station 3.
- Button 4: Random play / Preset station 4.
- Button 5: Previous folder / Preset station 5.
/MP3 track -10 down (long press)
- Button 6: Next folder / Preset station 6.
/MP3 track +10 up (long press)
12. - Aux-in jack
13. - Unlock the front panel.
14. - USB connector
EQ
INT
RCD 272BTi manual
4
OTHER INSTRUCTIONS
Press the
button to open the panel.
1. SD/MMC card slot
2. Disc eject
3. Reset hole
Note: Pressing the RESET hole will erase the clock setting and stored stations.
4. Panel status indicator
Lights up when you ip the panel down;
Twinkles when you remove the panel.
5. Disc slot, insert the disc.
1
3
4
2
5
RCD 272BTi manual
5
RADIO OPERATIONS
Select tuner as playing source
Press [SRC] button once or more to enter
RADIO mode.
Selecting the radio band
Press the [BAND / ] button on the panel to
select one radio band among FM1, FM2, FM3,
AM.
Manual tuning
During manual tuning, the frequency will be
changed in steps.
Press the [
] or [ ] button on the panel to
tune in a higher / lower station.
Auto tuning
Press and hold the [ ] or [ ] button to
seek a higher / lower station.
To stop searching, repeat the operation above
or press other buttons having radio functions.
Note:
When a station is received, searching stops
and the station is played.
Preset scan
Preset scan receives the stations stored
in preset memory in order. This function is
useful when searching for a desired station in
memory.
1. Press the [PS/AS] button.
2. When a desired station is tuned in, press the
[PS/AS] button again to continue receiving
that station.
Note:
Be careful not to press and hold the [PS/
AS] button for 1 second or longer, otherwise
the auto store function will begin and the unit
starts storing stations.
Auto store
Only stations with sufcient signal strength will
be detected and stored in the memory.
Press and hold the [PS/AS] button (1 sec.) to
start automatic station search.
To stop auto store, press other buttons having
radio functions.
Notes:
1. After auto store, the previous stored stations
will be overwritten.
2. The unit has 4 bands, such as FM1, FM2,
FM3 and AM. Each bands can store 6
stations.
Manual store
When one expected radio station has been
detected, press and hold number button 1-6 to
store it in the memory.
Recall the stored stations
Press one numeric button among 1 to 6 on
the panel to select the corresponding stored
station.
Local seeking
When LOCAL seeking is ON, only those radio
stations with strong radio signal could be
received.
To select LOCAL function, press and hold the
[ DISP ] button on the front panel, then press
[
] button repeatedly until LO or DX isplays
on the screen, and rotate the [vOLUmE] knob
to select Local or Distant mode.
Note:
The number of radio stations that can be
received will decrease after the local seeking
mode is ON.
Display
First row: When receive the PS information of
RDS, the PS information will display on the
screen. If there are no PS information, the
band and frequency will display.
Second row: Press [DISP] button repeatedly
to switch among band, frequency, PTY, Radio
Text and clock.
RCD 272BTi manual
6
Radio Data System
This unit has a built-in “Radio Data System”
decoder system that supports broadcast
stations transmitting “Radio Data System” data.
When using the “Radio Data System” function,
always set the radio to FM mode.
AF function
The AF function switches to a different
frequency on the same network in order to
maintain optimum reception.
* The factory default setting is ON.
1. Set to system setup by long pressing [DISP]
button.
2. Press the [
] or [ ] button to select “AF”.
3. Rotate the [VOLUME] knob to select ON or
OFF.
•AFON:
“AF” indicator appears in the display and AF
function turns on.
•AFOFF:
“AF” indicator disappears in the display and
AF function turns off.
REG (Regional programme) function
When the REG function is ON, the optimum
regional station can be received. When this
function is OFF, if the regional station area
switches as you drive, a regional station for that
region is received.
* The factory default setting is ON.
RADIO DATA SYSTEM OPERATIONS
Notes:
• This function is disabled when a national
station such as BBC R2 is being received.
• The REG function ON/OFF setting is valid
when the AF function is ON.
1. Set to system setup by long pressing [DISP]
button.
2. Press the [
] or [ ] button to select
“REG”.
3. Rotate the [VOLUME] knob to select ON or
OFF.
Manually tuning a regional station in the
same network
This function is valid when the AF function is
ON and the REG function is OFF.
Note:
This function can be used when a regional
broadcast of the same network is received.
TA (Trafc Announcement)
In the TA standby mode, when a traffic
announcement broadcast starts, the traffic
announcement broadcast is received as top
priority regardless of the function mode so
you can listen to it. Traffic programme (TP)
automatic tuning is also available.
* This function can only be used when “TP”
appears in the display. When “TP” appears,
this means that the “Radio Data System”
broadcast station being received has traffic
announcement programmes.
Setting the TA standby mode
If you press the [TA] button, “TA” lights in the
display and the unit is set into the TA standby
mode until a trafc announcement is broadcast.
When a trafc announcement broadcast starts,
“TRAF INF” appears in the display. If you press
the [TA] button while a traffic announcement
broadcast is being received, the traffic
announcement broadcast reception is cancelled
and the unit goes into the TA standby mode.
Cancelling the TA standby mode
As “TA” lights in the display, press the [TA]
button. The “TA” in the display goes off and the
TA standby mode is cancelled.
PTY (Programme Type)
This function enables you to listen to a
broadcast of the selected programme type even
if the unit is on a function mode other than radio.
* Some countries do not yet have PTY
broadcast.
* In the TA standby mode, a TP station has
priority over a PTY broadcast station.
Selecting PTY
Press [MENU / ] button, then rotate the
[VOLUME] knob to select PTY type, press the
[VOLUME] knob, the unit begin searching.
RCD 272BTi manual
7
CD/MP3/WMA OPERATIONS
This unit can playback MP3/WMA les
Notes:
• If you play a WMA file with active DRM
(DigitalRights Management),therewillbe
no audio.
To disable DRM
(Digital Rights Management)
When using Windows Media Player 9/10/11,
click on Tool -> Options -> Copy Music tab,
then under Copy settings, unclick the Check
box for copy project music. Then, reconstruct
les.
Personally constructed WMA les are used at
your own responsibility.
Precautions when creating MP3/WMA le
Usable sampling rates and bit rates
1. MP3: Sampling rate 8 kHz-48 kHz,
Bit rate 32 kbps-320 kbps / VBR
2. WMA: Bit rate 32 kbps-196 kbps
File extensions
1. Always add a le extension “.MP3”, “.WMA”
to MP3, WMA file by using single byte
letters. If you add a le extension other than
specied or forget to add the le extension,
the le cannot be played.
2. Files without MP3/WMA data will not play.
The files will be played soundlessly if you
attempt to play les without MP3/WMA data.
* When VBR les are played, the play time
display may differ the play location.
* When MP3/WMA files are played, a little
no sound part is caused between tunes.
Logical format (File system)
1. When writing MP3/WMA le on a CD-R disc
or CD-RW disc, please select “ISO9660
level 1, 2 or Joliet” or Apple ISO as the
writing software format. Normal play may
not be possible if the disc is recorded on
another format.
2. The folder name and file name can be
displayed as the title during MP3/WMA play
but the title must be within 32 single byte
alphabetical letters and numerals (including
an extension).
3. Do not afx a name to a le inside a folder
having the same name.
Folder structure
A disc with a folder having more than 8
hierarchical levels will be impossible.
Numberoflesorfolders
1. Up to 999 les can be recognized per folder.
Up to 3000 les can be played.
2. Tracks are played in the order that they
were recorded onto a disc. (Tracks may not
always be played in the order displayed on
the PC.)
3. Some noise may occur depending on
the type of encoder software used while
recording.
Eject function
Just pressing the [
] button, ejects the disc .
Notes:
• If you force a CD into before auto reloading,
this can damage the CD.
• If a CD (12 cm) is left ejected for 15
seconds, the CD is automatically reloaded
(Auto reload).
Listening to a disc already loaded in the
unit
Press the [SRC] button to select the CD/MP3/
WMA mode.
When the unit enters the CD/MP3/WMA
mode, play starts automatically.
Loading a CD
Insert a CD into the center of the CD
SLOT with label facing up. The CD plays
automatically after loading.
Notes:
• Never insert foreign objects into the CD
SLOT.
• If the CD is not inserted easily, there may
be another CD in the mechanism or the unit
may require service.
RCD 272BTi manual
8
track advances ahead to the beginning of
the next track.
3. For MP3/WMA disc, press and hold the [ 6 ]
button (1 sec.) to move ahead to +10 tracks.
Track-down
1. Press the [
] button to move back to the
beginning of the current track.
2. Press the [
] button twice to move back to
the beginning of the previous track.
3. For MP3/WMA disc, press and hold the [ 5 ]
button (1 sec.) to move back to -10 tracks.
Fast-forward/Fast-reverse
Fast-forward
Press and hold the [
] button.
Fast-reverse
Press and hold the [
] button.
* For MP3/WMA discs, it takes some time until
the start of searching and between tracks. In
addition, some errors may occur in the play
time.
Folder Select
This function allows you to select a folder
containing MP3/WMA files and start playing
from the rst track in the folder.
1. Press the [ 5 ] or [ 6 ] button.
Press the [ 6 ] button to move the next
folder. Press the [ 5 ] button to move the
previous folder.
• Discs without the
or
TEXT
mark and CD-
ROMs cannot be played by this unit.
• Some CD-R/CD-RW discs may not be usable.
Pausing play
1. Press the [ 1 ] button to pause play.
“PAUSE” appears in the display.
2. To resume CD play, press the [ 1 ] button
again.
Displaying CD titles
This unit can display title data for MP3/WMA
disc.
When SCROLL is OFF, each time you press
the [ DISP ] button to change the title display.
MP3/WMA disc
Track -> Folder -> File title -> Album -> Title ->
Artist -> Track ...
Notes:
• If MP3/WMA disc has no ID3 TAG, “NO
TITLE” appears in the display.
• Only ASCII characters can be displayed in
Tags.
Selecting a track
Track-up
1. Press the [
] button to move ahead to the
beginning of the next track.
2. Each time you press the [
] button, the
CD/MP3/WMA OPERATIONS
2. To select a track, press the [ ] or [ ]
button.
Search Function
1. Press the [MENU /
] button to enter
FOLD SCH mode. Press the [VOLUME]
button to enter the folder list search mode.
2. Turn the [VOLUME] knob to select a folder.
3. Press the [VOLUME] button to enter the le
list search mode. And then the track list
appears in the display.
4. Turn the [VOLUME] knob to select a track.
5. Press the [VOLUME] knob to play.
* When play back MP3 / WMA file, this
function is performed in the current folder.
Top function
The top function resets the CD player to the
rst track of the disc. Press and hold the [ 1 ]
button (1 sec.) to play the rst track (track No. 1)
on the disc.
* In case of MP3/WMA, the first track of the
current folder will be played.
Other various play functions
Scan play
This function allows you to locate and play the
rst 10 seconds of all the tracks recorded on a
disc.
Press the [ 2 ] button to perform scan play.
RCD 272BTi manual
9
Repeat play
This function allows you to play the current
track repeatedly or play a track currently being
played in the MP3/WMA folder repeatedly.
CD:
1. Press the [ 3 ] button once or more until “RPT
ON” appears on the LCD to perform repeat
play.
2. Press [ 3 ] button again to cancel repeat
playback, “RPT OFF” appears on the LCD.
MP3/WMA:
1. Press the [ 3 ] button once or more until
“TRACK RPT” appears on the display to
perform repeat play, and “RPT” segment
lights on.
2. For MP3/WMA files, press [ 3 ] button
repeatedly until “FOLD RPT” appears on the
display for folder repeat play.
3. Press [ 3 ] button repeatedly until “RPT OFF”
appears on the display to cancel repeat
playback, and “RPT” segment goes o.
Random play
This function allows you to play all tracks
recorded on a disc in a random order.
Press the [ 4 ] button to perform random play.
CD/MP3/WMA OPERATIONS
1. Loading SD/MMC Card
Press
button to ip down the panel, insert the SD/MMC card
into the slot, with the front side at left. Close the panel, the unit
will play the music automatically.
2. Take out SD/MMC Card
Press SRC button and switch to non CARD mode, open the
panel, slightly press the card, take out the card when it was
popped out.
3. Loading USB equipment
Open the cap, insert the USB into the connector and the unit play
the music in the USB storer automatically.
4. Take out USB equipment
Press the SRC button and switch to non USB mode, then take off
the USB storer, close the cap.
———————————————————————
USB/SD/MMC Notes
USB functions (ash memory type) MP3 music play
USB/SD/MMC MP3 PLAYBACK
1. SD/MMC card support.
2. USB ash memory 2 in 1 (SD/MMC) support.
3. Fat 12 / fat 16 / fat 32 is possible.
4. File name: 32 byte / dir name: 32 byte / tag name: 32 byte.
5. Tag (ID3 tag ver 2.0)
- title / artist / album: 32 byte support.
6. Multi card reader not support.
7. USB 1.1 support.
USB 2.0 support
(It can not support USB 2.0 speed. Just, get the same speed with
USB1.1).
Not all USB devices are compatible with the unit.
RCD 272BTi manual
10
Press the [ EQ ] button to enter sound effect setting mode. First press
shows current EQ. Rotate the knob to changes DSP EQ in this order:
OFF -> POP -> ROCK -> CLASSIC -> JAZZ -> CUSTOM
Rotate the knob to changes CUSTOM, and press the knob, the
press [
] or [ ] button to select it including: BASS-G -> BASS-F
->BASS-Q -> MID-G -> MID-F ->MID-Q ->TREBLE-G -> TREBLE-F,
rotate the knob to select a value.
Press the [ EQ ] button, then press [
] or [ ] button to select
USER preset including:
BALANCE -> FADER -> LOUD -> SUBW FRE-> SUBW VOL, rotate
the knob to select a value.
BALANCE:LEFT 1-7->CENTER->RIGHT 1-7
FADER:FRONT 1-7->CENTER->REAR 1-7
LOUD: ON/OFF
SUBW FRE: THROUGH -> 80 -> 120 -> 160
SUBW VOL: (-6) - (+6)
SOUND SETTING STEERING WHEEL CONTROL
In any mode, press and hold [ DISP ]
button to enter system setup. Press
[ ] or [ ] button SWC SET is displayed.
1. At SWC menu, Rotate the knob to select a function, then press and
hold a button on the steering wheel (if your steering wheel support
the function) until the SET OK is shown and the unit will return to
normal mode. Now the function is saved in the button.
2. Repeat step 1 to set functions of other steering wheel buttons.
3. Exit the setting menu and you can operate the player by the buttons
on the steering wheel.
4. If you want to change the setting, enter the SWC setting menu, select
a function on the screen, press and hold a button on the steering
wheel more than 2 seconds, then the function is saved into the button
on steering wheel. At the same time, all other steering wheel settings
are clear, you must reset them.
RCD 272BTi manual
11
iPod & iPhone OPERATIONS
Connect
Connect an iPod or iPhone to the USB
connector.
When connecting a device, the unit will read the
les automatically. The track information display
on the screen once playback start.
MENU
In the S-CTRL OFF mode, press [mENU /
] button,rotate the [vOLUmE] knob select
“mUSIC” or “vIDEO”.
Select “mUSIC”, press the [vOLUmE] knob,
then rotate the [vOLUmE] knob to show PLAY
LISTS / ARTISTS / ALBUMS / GENRES /
SONGS / COMPOSERS, press and rotate the
[vOLUmE] knob to select a desired option, then
press the [vOLUmE] knob to conrm.
Select “vIDEO”, press the [vOLUmE] knob,
then rotate the [vOLUmE] knob to show
MOVIES / MUSIC VIDEO / TV SHOWS /
VIDEO PODCASTS / RENTALS, press and
rotate the [vOLUmE] knob to select a desired
option, then press the [vOLUmE] knob to
conrm.
Note:
• VIDEO MENU item is different by the model
of connected iPod and language setting.
Repeat play
This function allows you to play the current
track repeatedly or play all tracks in your iPod/
iPhone repeatedly.
1. Press the [ 3 ] button once or more until “RPT
ON” appears on the LCD to perform repeat
play.
2. Press [ 3 ] button repeatedly until “RPT
OFF” appears on the LCD to cancel repeat
playback.
Random play
This function allows you to play all tracks
recorded on a disc in a random order.
1. Press [ 4 ] button repeatedly until “ALBUm
RDm” appears on the LCD for album random
play.
2. Press the [ 4 ] button once or more until
“SONG RDm” appears on the LCD to perform
random play.
3. Press [ 4 ] button repeatedly until “RDm
OFF” appears on the LCD to cancel random
playback.
Setting iPod simple control mode
Use this function if you wish to operate through
your iPod connected to this unit via the USB
cable.
* The factory default setting is “ OFF ”.
1. Press and hold [DISP] button to enter system
setup.
2. Press [
] or [ ] button to select
“ S-CTRL”.
3. Rotate the [vOLUmE] knob to select
“ ON ” or “ OFF ” .
• ON: Operations are made through your iPod.
• OFF: Operations cannot be made through
your iPod.
Notes:
• When performing iPod operations using
simple control mode, make the operations
slowly. If repetitive operations are performed
too quickly, unforeseen errors may occur.
• When performing iPod operations using
simple control mode, please do not operate
the iPod and the unit at the same time,
otherwise there may be unexpected event
happened.
• Some iPod models do not support this
function. Consult your nearest dealer or
website to confirm which models do not
support this function.
iPod menu alphabet search
This function searches the subfolders for
desired alphabetical letters.
1. Press the [mENU /
] button to select the
iPod menu mode.
2. Press the [vOLUmE] knob to switch between
categories.
MUSIC: PLAYLIST, ARTISTS, ALBUMS,
GENRES, SONGS, COMPOSERS
VIDEO: MOVIES, MUSIC VIDEOS, TV
SHOWS VIDEO PODCASTS, RENTALS
3. Press the [vOLUmE] knob. (The contents of
the category are displayed.)
4. Press and hold the [ DISP ] button (1 sec.).
5. Rotate the [vOLUmE] knob to select the
desired letter to search.
6. Press the [DISP] button again to next perform
search.
7. Press the [ vOLUmE ] knob to conrm.
RCD 272BTi manual
18
SPECIFICATION
General
Power supply:
12V DC (11V-16V)
Test voltage 14.4V, negative
ground
Maximum power output: 75Wx4 channels
Continuous power output: 20Wx4 channels (4
,10% T.H.D.)
Suitable speaker impedance: 4-8 ohm
Pre-Amp output voltage:
2.0V (CD play mode: 1KHz, 0 dB, 10 K
load)
Fuse: 15A
Dimensions(WxHxD): 178x50x166mm
Weight: 1.7kg
Aux-in: ≥300mV
FM Stereo Radio
Frequency range: 87.5-108.0MHz
Usable sensitivity: 8 dBμ
Quieting sensitivity(S/N=50dB): 12 dBμ
Frequency response: 30Hz-15kHz
Stereo separation: 30dB (1kHz)
Image response ratio: 50dB
IF response ratio: 70dB
Signal/noise ratio: 55dB
AM(MW) Radio
Frequency range: 522-1620 KHz
Usable sensitivity(S/N=20dB): 30 dBμ
Note: Specications and the design are subject to change without notice
due to improvements in technology.
Disc Player
System: Disc digital audio system
Frequency response: 20Hz-20kHz
Signal/noise ratio: >80 dB
Total harmonic distortion: Less than 0.20% (1kHz)
Wow and utter: Below measurable limits
Channel separation: >55 dB
Components
Mounting collar 1
Machine screws M5x6mm 4
Mounting bolt (50mm) 1
L-key 2
Operating instructions 1
Rubber cushion 1
“Made for iPod,” and “Made for iPhone” mean that an electronic
accessory has been designed to connect specifically to iPod, or
iPhone, respectively, and has been certied by the developer to meet
Apple performance standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards. Please note that the
use of this accessory with iPod or iPhone may
affect wireless performance.
iPhone and iPod are trademarks of Apple Inc.,
registered in the U.S. and other countries.
… 17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caliber RCD272BTI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caliber RCD272BTI in the language / languages: English as an attachment in your email.

The manual is 5,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Caliber RCD272BTI

Caliber RCD272BTI Quick start guide - English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info