Manual Caliber RCD234DBT (page 13 of 18) (English)

699168

Zoom out

Zoom in

1/18

Owner’ Manual

Radio Operation

Owner’s Manual

1. Choose Radio Band

Press the BND Button anytime to ac-

cess the radio function.

The unit comes with five bands- three

FM Bands (FM1, FM2, and FM3) and

two AM Bands (AM1, and AM2). Each

of the five bands can store up to six

preset stations, for a total of 30 preset

memory stations.

2. Radio Tune / Seek Function

In Radio Mode, press and hold the

“>>| ” or “|<<“, manual seek will be

activated and the radio frequency will

proceed by one step.

Press the SEEK |<< or >>| Button

once, and the radio will seek the next

strong and clear frequency station.

Repeat to seek more stations in your

listening area with a strong signal.

3. Mono / Stereo Reception Control

In FM radio mode, Press SEL But-

ton repeatly until the display shows

‘MONO’ or “STEREO”. Roate the Vol

button to choose the reception con-

trol, the word “MONO” shown on the

screen indicating the mono reception

is received.

4. Save Your Preset Stations

There are six numbered preset but-

tons which can store and recall sta-

tions for each band. While listening to

a radio station you would like to save

as a pre-set, press and hold one of

the buttons numbered 1-6 until the

preset station number is shown. The

button you pressed is now the pre-set

button for that station.

5. Automatic Store / Preset Scan

A. Automatic Scan & Store

While listening to the FM Radio, press

and hold the F/PS Button for 3 sec-

onds. The receiver will automatically

scan and save the station listening

to.

While listening to the AM Radio, press

and the F/PS Button for 3 seconds.

The receiver will automatically scan

and save the station you are listen-

ing to.

B. Scan Saved Stations

Press the F/PS button once to per-

form the scanning functions. In FM

mode, press the F/PS button and

the stations in that FM band will

be scanned; press the button in AM

mode and scan the band stations of

that AM Band.

6. Local / DX

Press SEL Button repeatly until the

display shown “LOC”. Rotate the VOL

button to choose “LOC ON“ or “LOC

OFF”.

a. “LOC ON” showing on the display,

means local reception is turned on;

b. “LOC OFF” showing on the display,

means distant reception is turned on.

Local and distance reception set-

ting can facilitate the radio reception,

depending on the location in which

the radio is being used.

7. DAB Function

This device is equiped with DAB

function. Press MOD to cycle to DAB

mode. Press F/PS to scan all the

radio stations. When a station is lis-

tening, press BND to show the follow-

ing information of the station:

a. Name;

b. Type;

c. Code information;

d. Frequency;

e. Date;

f. Signal strength.

Long press the Volume knob to show

the DAB time synchronization with the

system.

Radio Operation

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Caliber RCD234DBT in the language / languages: English as an attachment in your email.

The manual is 1,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Caliber RCD234DBT Manual

Product: