536912

Caliber RCD212BTI Manual

15
Zoom out
Zoom in
Previous page
1/23
Next page
RCD 212BTi • MANUAL
15
Owner’ Manual
1. Choose Radio Band
Press the MOD Button to access the
radio function.
The unit comes with five bands- three
FM Bands (FM1, FM2, and FM3) and
two MW Bands (MW1, and MW2)
selects. Each of the five bands can
store up to six preset stations, for a
total of 30 preset memory stations.
2. Radio Tune / Seek Function
In Radio Mode, press and hold the
SEEK |<< or >>| Button for 2 seconds,
and the display will show”MANU
SEEK”. Press the SEEK |<< or >>|
Button once to manually adjust the
radio frequency.
3. Tuning
Press the SEEK |<< or >>| But-
ton once the radio will seek the next
strong and clear frequency station.
Repeat to seek more stations in your
listening area with a strong signal.
4. Mono/Stereo Reception Control
In FM radio mode, Press the SEL
Button until "MONO" is shown on the
display. Roate the VOL +/- to select
STEREO or MONO. Improvement of
reception of distant stations can be
done by selecting “MONO” operation
which may cut down some reception
noise.
5. Local / Distant Control
In FM radio mode, Press the SEL
Button until " LOCAL" is shown on the
display. Roate the VOL +/- to select
"LOCAL" or "--DX--".
Local and distance reception setting
can facilitate the radio reception, de-
pending on the location in which the
radio is being used.
6. Save Your Preset Stations
There are six numbered preset but-
tons which can store and recall sta-
tions for each band. While listening to
a radio station you would like to save
as a pre-set, press and hold one of the
buttons numbered 1-6 until you hear a
beep. The button you pressed is now
the pre-set button for that station.
7. Automatic Store/Preset Scan
There are six numbered preset but-
tons which can store and recall sta-
tions for each band. While listening to
a radio station you would like to save
as a pre-set, press and hold one of the
buttons numbered 1-6 until you hear a
beep. The button you pressed is now
the pre-set button for that station.
A. Automatic Scan & Store
While listening to the FM Radio, press
and hold the F/PS Button. The receiv-
er will automatically scan and save
stations of the 3 FM Bands.
While listening to the MW Radio,
press and hold the F/PS Button. The
receiver will automatically scan and
save stations of the 2 MW Bands.
B. Scan & Preview Saved Stations
Press the F/PS button once and the
receiver will scan the radio stations in
the current band.
Radio Operation
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caliber RCD212BTI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caliber RCD212BTI in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Caliber RCD212BTI

Caliber RCD212BTI Quick start guide - English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info