Manual Caliber RCD125BT (page 5 of 28) (English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish)

675021

Zoom out

Zoom in

1/28

Inserting discs.

Your player accepts only one disc at a time for playback. Do not attempt to load more than one disc.

Make sure the label side is facing up when you insert the disc. “Disc error” will be displayed on your

player if you insert a disc incorrectly. If “Disc error” continues to be displayed even though the disc

has been inserted correctly, push the RESET switch with a pointed object such as a ballpoint pen.

Playing a disc while driving on a very bumpy road may result in skips, but this will not scratch the disc

or damage the player.

Irregular shaped discs.

Be sure to use round shaped discs only for this unit and never use any special shaped discs. Use of

special shaped discs may cause damage to the mechanism.

new discs.

To prevent the disc from jamming, “Disc error” is displayed if discs with irregular surfaces are inserted

or if discs are inserted incorrectly. When a new disc is ejected immediately after initial loading, use

your nger to feel around the inside of the centre hole and outside edge of the disc. If you feel any

small bumps or irregularities, this could inhibit proper loading of the disc. To remove the bumps, rub

the inside edge of the hole and outside edge of the disc with a ballpoint pen or other such instrument,

then insert the disc again.

Installation location.

Make sure that the system will not be installed in a location subjected to:

• Direct sun and heat

• High humidity and water

• Excessive dust

• Excessive vibrations

Correct handling.

Do not drop the disc while handling. Hold the disc so you will not leave ngerprints on the surface. Do

not afx tape, paper, or gummed labels to the disc. Do not write on the disc.

Disc cleaning.

Fingerprints, dust, or soil on the surface of the disc could cause the DVD player to skip. For routine

cleaning, wipe the playing surface with a clean, soft cloth from the centre of the disc to the outer

edge. If the surface is heavily soiled, dampen a clean, soft cloth in a solution of mild neutral detergent

before cleaning the disc.

Disc-accessoires

There are various accessories available on the market for protecting the disc surface and improving

sound quality. However, most of them will inuence the thickness and/or diametre of the disc. Using

such accessories can cause operational problems.

Playable discs

Mark Recorded content Disc-size

Music - CD

Audio 12 cm

als ik contact van de auto uitzet en weer aan zijn alle instelling terug naar fabrieksinstellingen wat is daar de oorzaak van en hoe los ik dit op Submitted on 6-7-2021 at 00:30
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Caliber RCD125BT in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 26,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Caliber RCD125BT Manual

Product: