536910
10
Zoom out
Zoom in
Previous page
1/20
Next page
RCD 120 MANUAL
09
RADIO OPERATIONS
10
In Radio mode. Press MENU button for several seconds. LCD will be show from
DSP OFF/ON AREA USA/EUR. At AREA USA/EUR. You can use VOL +/-
to select the AREA frequency.
AREA USA/EUR SETUP
LOCAL RADIO STATION SEARCH
Press MENU button repeatedly to choose LOCAL(DX).Rotate VOL regulator or
press VOL+/- buttons on the RCto switch between LOCAL and DX.When the
LOCAL function is on the local stations(stations with weak radio)
Press MENU button repeatedly until LOUD ON is displayed.Rotate VOL regulator
on the front panel or press VOL+/VOL- buttons on the RC to select loudness
ON or OFF.
MOno/Stereo control (in FM radio mode)
Press MENU button repeatedly until the display shows STEREO (MONO).Rotate
VOL regulator or press VOL+/- buttons on the RC to switch between STEREO
recept
ion and MONO reception.Improvement of reception of distant stations
can be done by selecting mono mode,which may cut down some reception noise.
Press preset button (12): During INTRO ON, INT indicator comes on and
begins playing the first 10sec of each song, until the last song is played. It begins
playing the entire track from where INT started
RADIO OPERATIONS
- Program Scanning
Press AMS button (10) shortly to scan preset station. When the field strength
level is mo re than the threshold level of stop level, the radio is holding at that preset
number for several seconds with releasing mute, then searches again.
STATION STORING
Press preset button (11~16)
1) RADIO MODE.
M1 ~ M6
- PRESET MEMORY is loaded when key is pressed for less than 1 second.
- PRESET MEMORY is saved when key is pressed for longer than 1 sec.
2) CD MP3 / FLASH MP3 /
PLAY / PAUSE
Press button (11)preset
is activated. During a PAUSE, DISC INDICATOR flashes.
TOP - Fi rst son g will play whe n Top key is pr essed for longe r tha n 0.5s ec du ring pl ay.
INT
AUTOMATICALLY MEMORY STORING & PROGRAM SCANNING
- Automatically Memory Storing
Press AMS button (10) for several seconds, the radio searches from the
current frequency and checks the signal strength until one cycle search is finished.
And then 6 strongest stations are stored into the corresponding preset number
button.
BAND SELECTION
At tuner mode, press BAND button (9) to select the desired band. The
reception band will change in the following order:
FM1 FM2 FM3 ( 1) ( 2)AM1 MW AM2 MW
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caliber RCD120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caliber RCD120 in the language / languages: English as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Caliber RCD120

Caliber RCD120 Quick start guide - English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info