497359

Caliber MCD610BT Manual

8
Zoom out
Zoom in
Previous page
1/12
Next page
EN-8
Auto Seek/Preset scan (A/PS)
Preset Scan (PS) - By pressing shortly, the radio plays each preset station for 5
seconds.
Auto Seek (AS) - By pressing longer than 1 sec, auto seek is activated. The 6
strongest stations are preset and stored in the corresponding preset number. When
Auto Seek operation is nished, the radio executes the preset scan.
Storing and Recalling Frequencies
If you press any of the NUMBER (1-6) you can easily store up to six broadcast
frequencies for later recall with the touch of a button.
1. Choose a desired BAND.
2. When you nd a frequency that you want to store in memory, press a NUMBER(1-
6) and hold until the preset number shows and lit in the display.
3. The selected radio station frequency has been stored in memory. The next time
you press the same NUMBER (1-6) the radio station frequency is recalled from
memory.
Note: Up to 6 stations can be stored in each band.
USING THE RDS FUNCTION
What is RDS?
The RDS (Radio Data System) is a digital information system developed by the EBU (European Broadcast Union). Piggy-backed
on normal FM broadcasts, RDS offers a variety of information services and automatic retuning functions for RDS-compatible car
stereos. In 1988, RDS became available in the United Kingdom, France, West Germany, Ireland and Sweden.
‘AF’ Function (Alternative Frequencies)
- Press AF to toggle alternative frequency On/Off.
- When AF is ON, the radio checks the signal strength of the AF all the time, when it becomes too weak, the unit search for a
better signal within AF lists then switch to that frequency.
‘TA’ Function (Trafc Announcement)
When pressed short, it is activated as TA mode on or off. When TA mode is on and trafc announcement is transmitted.
– If the volume level was under the threshold point, it will be raised to the threshold point.
‘PTY’ Function (Program Type)
1. Press and hold PTY button to turn ON Program type.
2. Rotate VOL knob to select program type.
3. Once desired program shows, simply press PTY button once more and unit start searching for available stations.
Note: Program type will ash when searching for stations.
OPERATIONS COMMON FOR MP3/WMA/MPEG4
-10 Tracks Down / +10 tracks Up
1. Press -10 button to jump 10 tracks backward starting from currently played track.
2. Press +10 button to jump 10 tracks forward starting from currently played track.
Specifying particular track
During playback, all track le names under a folder will be displayed on the screen categorized by Music, Photo, Video. Simply tap
the screen on which category you want to play and rotate the volume knob to select le then push volume know to start playback.
Random Playback
Press RDM during playback to play the tracks in random/shufe order. Press it again to cancel.
Tips: RDM is SHUFFLE on screen.
Stopping Playback
1. Press Stop on remote control during playback to stop playback. That position is stored in memory.
2. Press to continue. Playback starts from the position at which it was stopped.
Note: There is no STOP function in audio playback. Audio playback uses function.
Fast Forward / Fast Reverse
Note: or on remote control is the same function as or on head unit.
1. During playback, press and hold or unit scans at the speed of x2 - x4 - x8 - x16 - x20
2. To resume normal playback at a desired point, press .
Note: No sound is played during fast forward / fast reverse.
Finding the Beginning of Tracks
During playback, press or .
: Press to start playback from the beginning of the previous chapter or track.
: Press to start playback from the beginning of the following chapter or track.
Pause Playback
During playback, press . Press again to resume playback.
A-B Repeat Playback
This feature allows you to loop playback a section of the movie starting from Point A to B.
1. Press the button to play the movie.
2. Once you have located the section you wish to playback on loop repeat, press and hold A-B button. You will see “Rep-A” on
the screen.
Preset Memory Station 1-6
Currently Tuned Station
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caliber MCD610BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caliber MCD610BT in the language / languages: English as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info