572014

Caliber MCD264BT Manual

11
Zoom out
Zoom in
Previous page
1/20
Next page
Short pressing the button, it scans
each preset stations in the memories of the
current band. Each preset station will blink
for 5 seconds with releasing mute, then go
to next station, finally the radio will go to
play the start preset station. Press the
again to stop preset scanning.
Pressing the button for more than 2
seconds, it will enter auto store mode.
The whole band is scanned and the six
strongest stations are stored into the preset
memories, after scanning is finished.
Press the button short toggles AF
mode on or off. There are 3 state the “AF”
icon on the LCD display:
AF switching mode off.
AF switching mode on,and
has RDS information.
AF switching mode on, but
RDS information is not received yet.
When AF switching mode is selected, the
radio checks the signal strength of the AF
all the time. The interval of checking time of
each AFs depends on the signal strength of
current station, from a few minute for strong
station to few seconds for weak station.
Every time that new AF is stronger than
current station, it switches over to that
frequency for very short time. Because the
mute time of AF switching or checking time
is very short, it is almost inaudible in case of
normal program. During FM mode, when AF
is on, manual store, Auto store/preset scan
function can only receive and save RDS
program.
Press the button for longer 2
seconds to toggle on or off region mode .
Some broadcasting stations change their
program from normal broadcasting to
regional broadcasting for a certain time
period.
the
current listening program remains
unchanged
it allows the
reception moved to the regional station
AMS
AMS
- Auto store:
AMS
AF/REG
Icon “AF” off:
Icon “AF” on:
Icon “AF” blink:
AF/REG
Setting Alternative Frequencies
Regional Program Operation
RDS (Radio Data System) Operations
When regional mode on, the radio accepts
RDS stations with regional variants,
; When regional mode off, the
radio ignores regional variants,
.
To select a radio band
Auto/ Manual tuning
BAND
- Automatic search mode:
- Manual search mode:
In tuner mode, Press the button
repeatedly to select a radio broadcasting
band you would like to hear. The FM band is
toggled cyclically through the
tuning bands: ->FM 1-> FM 2 -> FM 3 -> .
Briefly press the or button, the auto
search will start. It will search upward or
downward for the strong signal radio station
within the current band. In auto tuning,
press the or button to stop tuning.
Pressing and holding the or button for
about 2 seconds until “MANUAL” appears
on LCD display, it will change into manual
search mode.
Press the or button short and
repeatedly to manually search upward or
downward step by step for the desired radio
station within the current band.
In manual search process, if the both
buttons haven’t been pressed within 5
seconds, it will change into automatic
search mode automatically, “AUTO” will be
visible on the LCD display.
or
:9
:9
:9
:9
:9
To store / recall a preset radio stations
Auto store / Preset scan
You can store up to a total of 18 FM radio
stations in the memory, manually or
automatically.
- Select a band (if needed)
- Select a station by buttons
-Pressandholdapresetbutton( - )
which you want to store the station for at
least 2 seconds, the current station will
be saved into the relevant preset memory
bank. When a RDS station is being
stored, the relevant PI, PS, AF list are
stored.
- Select a band (if needed).
- Press a preset button (1-6) briefly to
recall the stored station. In case of RDS
mode, the strongest AF is selected after
AF searching.
- To store a station:
16
- To recall a station:
- Preset scan:
Radio Operations
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caliber MCD264BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caliber MCD264BT in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Caliber MCD264BT

Caliber MCD264BT Quick start guide - English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info