169032
29
Zoom out
Zoom in
Previous page
1/34
Next page
Bluetooth Operations
Answering An Incoming Call
User can press the button to answer /
accept the incoming call.
1. When there is an incoming call, the ring
tone is output from the car speaker, and
the caller number will be shown on the
display. If the incoming call has no caller
number, the display will shown
“UNKNOWN”.
2. Always press the button to answer/
accept the call after display showing the
“Caller Number” or “UNKNOWN”.
3. The audio output of the current mode will
be muted and the ringing tone will be
heard. If an incoming call do not want to
be answered, user can use the to
adjust the ring tone level.
4. If there is an incoming call during the
standby mode (Ignition on & Power Off),
this unit will automatically switch on.
5. While there is an Incoming call or during
talking mode, only the / / /
buttons are functional, all the other button
function keys are disable.
Ending A Call
Rejecting An Incoming Call
Making An Outing Call
To end a call, press the “CLEAR” button,
and the unit will automatically switch back to
the previous mode and release the “Mute” at
the same time.
User can press the “CLEAR” button to
reject an incoming call.
User can dial the phone number either on the
Mobile Phone or simply directly entering phone
numbers on the front panel of this unit.
1. Press the button to start making an
outgoing call, and the below Phone
Keypad will be shown on the TFT:
2. Use the to navigate thru the numeric
0-9 *, # & +.
3. Press the button to confirm the input
of the selected number.
4. Use the button to clear the wrong
input number.
5. Once the phone number has been
entered completely, Press button to
start dialing the call, and the below
display will show on the TFT:
TIPS
During the Calling mode, if need to input any
number, for example: the Pin Code Input or
Service Number Dial Input, user can Short
press the button to enter into the numeric
input interface, and then rotate to
navigate thru the desires input number and
press the button again to confirm the
input of the selected number.
Handsfree Phoning
NOTE
While there is an outgoing call or during
talking mode, only the / / /
buttons are functional, all the other
function keys are disabled.
.
User can use the to adjust the talking
volume level.
To end the conversation,press button.
The unit will switch back to the previous
mode automatically. The mute of the
previous mode will be released at the
same time.
During the talking mode, if the Ignition is
being turned off, the unit will keep the
conversation even if the Ignition is
Switched off. After the conversation is
finished, user can press button to
switch off the unit.
E - 28
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caliber mcd 786 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caliber mcd 786 in the language / languages: English as an attachment in your email.

The manual is 2,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Caliber mcd 786

Caliber mcd 786 Quick start guide - English - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info