169032
19
Zoom out
Zoom in
Previous page
1/34
Next page
Dual Zone Operation
To Switch On Dual Zone Mode
The Available Playback Mode
To Select Front/Rear Sources
To Operates Function of Front /
Rear Soures
This unit is equipped with the most advance
“Dual Zone” feature. This function is useful if
the user would like to select different modes of
the Audio and Video output source for Front
and Rear Speakers and TFT Screens. For
example, user can select to listen to Tuner
music for front speakers and rear speaker for
DVD movie.
E - 8 1
1. “Offis the default setting.
1. Front Zone: Tuner and BT Audio modes are
available select for playback on Front Zone.
Once “On” is selected, use to access
2. Long press the button on the control
panel or remote control to access into Dual
Zone Control mode:
and use select 2-Zone to On.
to Front or Rear mode by rotate to select
the mode want to playback.
1. The Front Panel & Remote control, is
defaulted to control the FRONT source's
function / operation.
2. When DUAL ZONE is turned “On”, the
button is used to change Front source & Rear
source. Press the button repeatedly to
change between Front and Rear.
The default audio output reverts to what the
user selected for the FRONT Zone source
when DUAL ZONE IS “OFF”. For example:
When the DUAL Zone is “ON “, user has
selected DVD for Front ZONE & Tuner for Rear
ZONE. Once DUAL ZONE is turned “OFF”,
Audio Output for all 4 speakers becomes
“DVD” mode.
The Default Setting When Dual
Zone is “On”
To Switch Off Dual Zone Mode
The Default Setting When Dual
Zone Is In “off” Mode
3. The TFT screen will display the Rear Source
mode for 10 seconds. User has 10 seconds
to make the desired operation on the Rear
Source's function on the Front Panel or
Remote Control.
4. The will automatically switch
back to the Front Source after 10 seconds.
And the Front Panel and Remote now is
resumed to operate for Front Source's
function again.
TFT screen
1. When DUAL ZONE is turned on, the audio
output will be muted for about 1 second.
2. The default source / mode for Front ZONE is
Tuner & for Rear ZONE is “DVD”.
3. The default Volume level is “12” for both
Front & Rear ZONE audio output. (or the
Volume Level set as VOL PGM Level set in
the Menu).
4. The TFT screen is defaulted to display the
Front Mode.
5. When Dual Zone is “On”, some of the
AUDIO FUNCTIO N WILL NOT BE
FUNCTIONAL, THESE FUNCTION ARE:
Bass / Treble / Middle / Balance / Fader /
Sub-woofer / iX-bass.
Long press button to access into Dual
Zone and by rotate select Off mode.
TIPS
Long press System Menu” and access
into Dual Zone mode is same can be
operation the Off mode..............................
NOTE
AV-1 & AV 2 are considered as the same mode
/source in the DUAL ZONE function. So if either
the Front or Rear Source is set to AV-1 or AV-2
mode, The other ZONE is not allowed to select
the AV-2 or AV-1 Mode eg: If F-Zone is selected
AV-1”, then R-Zone is not allow to have ”AV-2”.
2. Rear Zone: Tuner , Media (DVD/USB/SD) AV
modes are available select for playback
Rear Zone.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caliber mcd 786 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caliber mcd 786 in the language / languages: English as an attachment in your email.

The manual is 2,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Caliber mcd 786

Caliber mcd 786 Quick start guide - English - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info