Installation Guide
Installation procedures
First complete the electrical connections, and then check them for
correctness.
Reset
Press the Reset button with a pointed object
to reset the unit to the original status.
(Note: Pressing the reset button will erase the
clock setting and stored stations.)
Installation Opening
This unit can be installed in any dashboard
having an opening as shown above.The
dashboard should be 4.75mm - 5.56mm thick
in order to be able to support the unit.
1. Insert mounting collar into the dashboard, and bend
the mounting tabs out with a screwdriver.
(Make sure that lock lever is flush with the mounting
collar. Not projecting outward)
2. Secure the rear of the unit
After fixing mounting bolt and power connector, fix the
rear of the unit to the car body by rubber cushion.
3. Insert trimplate
GB 13