572040
6
Zoom out
Zoom in
Previous page
1/10
Next page
1.
Press the and button on the top panel together
Volume - Power/Mode
for more than 5 seconds to start Wi-Fi network setup.
2.
On your iOS device, Mac or PC, select the network called
from Wi-Fi network settings.
3.
Launch a web browser (e.g. Safair, Chrome, or Firefox) and type in
“192.168.1.12” at the address bar.
4.
Select the “Profile Configuration” to set the network setup.
5
7.
.
Select preferred Wi-Fi network from the “Select Option”
list of available. If a password is necessary for the Wi-Fi
network, please input it in the “WPA Passphrase”.
After a while, the Wi-Fi status LED stops blinks and stays
green. The unit joins the Wi-Fi network successfully.
8.
Select the same Wi-Fi network on your iOS device, Mac
or PC. Wait until successful Wi-Fi connection to the router.
A Wi-Fi signal icon is displayed on AirPlay device.
6.
Click Apply at the bottom of the page to apply your settings.
And then click OK
settings.
on the popup menu to confirm your
S
Restart the Wi-Fi network from player
uccess!
Congratulations, you have successfully connected your player to your
wireless network and now you can start enjoying wireless
au
dio
anywhere in your home or oce.
Note
: To begin using AirPlay wireless streaming, your AirPlay source
devices (Mac or PC with your iTunes library as well as your iPod
touch, iPhone or iPad) must be connec
ted to the same Wi-Fi
network that the unit is connected to.
Wi-Fi Network Setup for AirPlay
Please verify the following steps before attempting to connect your player to a Wi-Fi network:
To enjoy AirPlay wireless audio, you must have the following:
- iTunes or an iOS device (iPod touch, iPhone, or iPad).
- A functioning home network with Wi-Fi.
Download the latest software updates for iTunes and your iOS
device to ensure that you are able to enjoy the latest AirPlay
enhance-
ments and compatibility.
Have your Wi-Fi network name (SSID) and password (if applicable) available for reference.
Note: A
Note: The Wi-Fi status LED blinks in green and red alternately.
irPlay requires iTunes 10.5 (Mac and PC) or later; or an apple device with iOS 5.0 system or later.
Check list
COption B: onnecting with your iPod touch, iPhone, iPad, Mac or PC over Wi-Fi
-5-
To restart the current network, click the Reset button on the right of back panel for 3 seconds, source LED will illumine
lightblue. After a while, the Wi-Fi status LED indicates from green to red .
Connected Not Connected
HFG 501BTi CALIBER
AirPort: On
Turn AirPort O
HFG 501BTi CALIBER
Another network
Another network
Another network
Another network
Join Other Nework...
Create Network...
Open Network Preferences...
Devices...
http://192.168.1.12
Customize the name
of your speaker
Select your Wi-Fi
network from list
Click for
confirm
Status Inforamtion
Profile Configuration
Profile Configuration
Digital Media Player Name:
Active Profile:
Profile name:
Service Set ID (SSID):
WPA Passphrase:
choose Profile to be configured:
1
Apply
HFG 501BTi CALIBER
Profile 1
Current Profile
Firmware Update
JB Access Point
Select Option
Apply
1
Show
Allow Ad-hoc connection: Ad-hoc
Profile 1
Digital Media Player Wireless LAN Settings
[ + ] ADVANCE SETTINGS
HFG 501BTi CALIBER
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caliber HFG501BTI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caliber HFG501BTI in the language / languages: English as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Caliber HFG501BTI

Caliber HFG501BTI Quick start guide - English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info