699227

Caliber CAM 030 Manual

4
Zoom out
Zoom in
Previous page
1/18
Next page
CAM 030
English
Installing the CAM030
Look for a location that will give you the best view behind the vehicle. This should not be directly next to or under a reverse/
backup lamp as it may blind the camera at night. Avoid license plate lamps as well as they too can blind the camera at night.
Determine which casing option (A/B/C) is most suitable for your vehicle.
Wire the camera’s power wire to the vehicle’s reverse lamp:
a) Locate the reverse lamp in the tail light assembly
b) Using a crimp connector or by soldering attach the red wire to the positive 12 volt wire from the reverse lamp. This should
only have power when the car is in reverse gear and the white lamp illuminated. Attach the black wire to the Ground
(Negative 12 Volts only).
Run the extension cable to the location of the monitor/head-unit (not included) and connect the other end of the extension
cable to the camera. Yellow RCA connected to the Video/CAM input.
Blue wire:
Cut to turn off the guiding lines*
White wire:
Cut to horizontally mirror the image on screen*
*Turn the camera OFF and ON again for the cut to take effect
Head-unit
On some head-units you need to connect the 12V red wire to the ‘back cam’ wire on your head-unit. The screen will
automatically turn ON when reversing.
Warnings
The product is intended to assist in safe driving and to allow
the driver to have a broader rear view while the vehicle is in
reverse. You, as the driver, are solely responsible for the safe
operation of your vehicle and the safety of your passengers
according to local trafc regulations. Do not use any features
of this system to the extent that it distracts you from safe
driving. Your rst priority while driving should always be the safe
operation of your vehicle. Caliber Europe BV cannot accept any
responsibility whatsoever for accidents resulting from failure to
observe these precautions or safety instructions
1. This product utilizes high voltage. Any unauthorized
modications or damage to the product may result in
electrical shock. Handle all components with care. Inspect
regularly for damage to components and cabling.
2. You are responsible for ensuring that the installation of this
product does not void or affect the vehicle manufacturer’s
warranty. Caliber Europe or its subsidiaries are not liable
in full or in part for improper installation resulting in loss
or damage to your property, or for voiding all or part of the
vehicle manufacturer’s warranty.
3. Do not apply excessive force to any of the components
contained within this kit. Excessive force used before,
during or after installation that results in a damaged or non-
functional part will void all warranties.
4. Please follow the procedures in this installation manual.
Improper installation or modication of this product will void
all warranties.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caliber CAM 030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caliber CAM 030 in the language / languages: English, German, Dutch, French, Swedish, Spanish as an attachment in your email.

The manual is 4,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info