165899
3
Zoom out
Zoom in
Previous page
1/19
Next page
Mounting your Caliber Amplifier
Before mounting your Caliber Amplifier you must carefully choose the place
where it can be installed.The amplifier has to have at least 5 cm (2”) ventilation
space at all sides, to allow the heat to rise away from the amplifier.
Be sure that the power and signal cables can enter and leave the amplifier in a
straight line, to avoid the risk of malfunction.
The amplifier should be protected from exposure to moisture and direct sun-
light.The best places for it to be mounted are:
The floor of the trunk.
• Under the driver’s seat
• On your sub-woofer case.
If you’ve decided where to place your Caliber Amplifier, and you’ve convinced
yourself there is enough air circulation and protection from unusual hazards,
Mark the mounting surface using the amplifier as a template (Placing masking tape
on these surfaces first will make your markings more visible).
Drill 2.5 mm (1/8”) diameter holes at the marked locations and mount the
amplifier using the supplied self-tapping screws.
Note: Do not drill any holes while using the amplifier as a template.
You can easily damage the amplifier’s anodized coating in this
manner.
Competition CA 510 Pro Series
Maximum Power Output at 14,4V
4 Ohm 20Hz - 30kHz THD 0,5% 2x 510W
4 Ohm 1kHz Mono Bridged 1x1100W
Continuous Power Output at 14,4V
4 Ohm 20Hz - 30kHz THD 0,5% 2x 255W
4 Ohm 1kHz Mono Bridged 1x 510W
Fuse Rating 4x 20A
Dimensions (WxHxD mm) 440 x 60 x 235
4-Channel Amplifiers
Competition CA 470 Pro Series
Maximum Power Output at 14,4V
4 Ohm 20Hz - 30kHz THD 0,5% 4x 130W
4 Ohm 1kHz Mono Bridged 2x 260W
Continuous Power Output at 14,4V
4 Ohm 20Hz - 30kHz THD 0,5% 4x 65W
4 Ohm 1kHz Mono Bridged 2x 130W
Fuse Rating 40A
Dimensions (WxHxD mm) 330 x 60 x 235
6-Channel Amplifier
Competition CA 670 Pro Series
Maximum Power Output at 14,4V
4 Ohm 20Hz - 30kHz THD 0,5% 4x 90W+ 2x 130W
4 Ohm 1kHz Mono Bridged 2x 180W+ 1x 260W
Continuous Power Output at 14,4V
4 Ohm 20Hz - 30kHz THD 0,5% 4x 45W + 2x 65W
4 Ohm 1kHz Mono Bridged 2x 90W+ 1x 130W
Fuse Rating 25A + 20A
Dimensions (WxHxD mm) 400 x 60 x 235
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caliber ca 130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caliber ca 130 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info