784919
21
Zoom out
Zoom in
Previous page
1/40
Next page
Operating Instructions
CONTROL OPERATION
Your control panel consists of an LCD display and convenient touch pads
that allow you to set the water temperature and adjust the skim/filter
cycle settings, lock spa temp, lock all spa functions, as well as control the
hydrotherapy jets, and lights.
LCD DISPLAY INVERSION
You may invert the control panel display for easier viewing from inside the
spa. To invert the display the following is required: Press the MODE()
and (
-)
buttons simultaneously. By pressing the MODE() and (
-)
buttons
simultaneously a second time the screen will go back to it’s original
display.
MODE BUTTON
From the Home screen use the MODE ( or ) button to scroll to the
System, Clean, Audio (if your spa is equipped) and Tools screen. Press
the (
+) button
to enter into the sub screens.
TEMPERATURE CONTROL
The set temperature range is from 26°C
(80°F) to 40°C (104°F). Whenever power is
disconnected and then reconnected to the spa,
the water temperature setting will automatically
return to the last temperature entered into the program.
To increase the set temperature, press the (
+)
button, once for each
degree of increase temperature desired. If you hold the (
+)
button down,
the set temperature will increase by one degree every half second.
To decrease the set temperature, press the (-) button, once for each
degree of decreased temperature desired. If you hold the (-) button down,
the set temperature will decrease by one degree every half second. When
the spa water has reached the set temperature, the “READY” icon will
display.
JET PUMP CONTROL
Pressing the “JETS” button changes the jet
pump functions, depending on the number of
presses:
PALATINO, MARINO & VANTO SPA
MODELS ONLY:
1st press: System 1 jet pump runs on low speed
2nd press: System 1 jet pump runs on high speed
3rd press: System 1 & System 2 jet pumps run on high speed
4th press: System 2 jet pump runs on high speed
5th press Both Systems jet pumps are off
CAPITOLO, CELIO & AVENTINE SPA
MODELS ONLY:
1st press: System 1 jet pump runs on low speed
2nd press: System 1 jet pump runs on high speed
3rd press: Jet pump off
The pump on high speed automatically turns off after operating
for one hour. The pump on low speed automatically turns off after
operating for one hour.
When the jets are active, the JETS icon on the control panel will
illuminate.
LIGHT ON/OFF & INTENSITY
CONTROLS
The light control uses four positions: High, Medium, Low, and Off. To turn
on the spa light, press the LIGHT button. This will place all lights in the
spa in the High, or maximum intensity position. When the lights turn on,
the light symbol will also illuminate on the control panel display. Press
the LIGHT button again to lower the intensity of the lights to the Medium
position. Press the LIGHT button again to lower the intensity even more,
placing the lights intensity in the Low position. Press the LIGHT button
one more time to shut the lights off. When the light is deactivated, the
light symbol will also turn off.
If the lights are left on, they will automatically be turned off by the control
system after 6 hours of continuous operation. The light symbol on the
panel will also turn off when the lights are deactivated.
If the lights will not turn on, make sure SPA LOCK is deactivated. SPA
LOCK disables the controls on the control panel (see following pages for
more information on SPA LOCK).
SYSTEM MODE
Your spa is equipped with a System Mode.
This function will allow you to conveniently
turn the jet(s) on high speed and the light on
maximum intensity at the same time.
To activate the system mode, perform the following functions:
Press the MODE ( or ) button until SYSON is displayed on the
screen. Press the (
+)
  button to activate the SYSON mode feature. The
jets and light icons will illuminate on the display until the system mode is
deactivated.
18
Light Icon
Filter Cycle Icon
Jets Button
Light Button
Temperature
Down/Off
Temperature
Up /On
Mode
Power Icon
Sleep
Icon
Temp Ready
Icon
Filter Cycle 2
Icon
Filter Cycle
1 Icon
Jet Icon
Mode
SET
READY
F1
F2
READY
READY
READY
READY
READY
READY
READY
F1
READY
F1
F2
SET
F1
F2
SET
READY
F1
F2
READY
POWER
POWER
POWER
POWER
POWER
POWER
POWER
READY
F1
F2
POWER
Operating Instructions
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caldera Vacanza - serie 2022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caldera Vacanza - serie 2022 in the language / languages: English as an attachment in your email.

The manual is 3.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Caldera Vacanza - serie 2022

Caldera Vacanza - serie 2022 User Manual - German - 40 pages

Caldera Vacanza - serie 2022 User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info