784879
19
Zoom out
Zoom in
Previous page
1/44
Next page
Page 16 Operating Instructions
JETS CONTROL
The JETS hard button activates the jet pump(s). When the JETS hard button
is pressed, the jets menu will be displayed on the control panel with
low speed on Jet 2 turned on, the Jet Pump icon will also be displayed.
Press any of the soft keys next to the description to change the jet
functions between high, low speed (when available), or off.
The Jet pump icon will remain displayed until the button is pressed to
turn off the jet pump(s), or after one hour of continuous operation when
the pump(s) is automatically shut off
by the control system.
The jet pump(s) will turn themselves off
after one hour of continuous operation to
prevent overheating and conserve energy.
The jets can be restarted again with no
delay.
You may also activate the jet pumps
by pressing the JETS hard button as follows:
GENEVA, NIAGARA & TAHITIAN
1st Press = Pump 2 on Low 2nd Press = Pump 2 on High
3rd Press = Both Pumps on
High speed
4th Press = Pump 2 on Low, Pump
1 on High
5th Press = Pump 1 on High 6th Press = Pumps off
CANTABRIA (Three pump system)
1st press = Pump 1 on Low 2nd press = Pump 1 on High
3rd press = Pump 1 on High &
Pump 2 on Low
4th press = Pump 1 on High &
Pump 2 on High
5th press = Pump 1 on Low &
Pump 2 on High
6th press = Pump 1 on Low &
Pump 2 on Low
7th press = Pump 2 on Low 8th press = Pump 2 on High
9th press = Pumps Off
LOUNGE JETS (CANTABRIA MODEL ONLY)
The Lounge Jets option will only be
displayed if you own a CANTABRIA
spa. This option is used to turn the
Lounge jet pump On and Off. To
access Lounge Jet option, press the
JETS hard button to enter the Jets
Screen then press the soft button next
to Lounge Jets to activate the Lounge
jet pump. Press the soft button next to Lounge Jets a second time to
deactivate.
LIGHT CONTROL
All UTOPIA spas are equipped with the SpaGlo
multi-zone lighting
system.
Press the LIGHTS hard button to
activate all lights and display the
Lighting Options screen.
The LIGHTS hard button can also be
used to cycle through the light zones
as follows:
1st press: All Lights On
2nd press: Topside lights Off
3rd press: Waterfall light Off
4th press: Underwater lights reduce to Brightness = 2; Exterior Lights
remain On
5th press: Underwater lights reduced to Brightness = 1; Exterior Lights
remain On
6th press: Underwater lights reduced to Brightness = 0 (Off); Exterior
Lights remain On
7th press: All Lights Off
The Lighting Options screen will
display four different light zones:
Underwater, Topside, Waterfall, and
Exterior.
Press the soft button next to the
lighting zone you want to adjust to
enter into the submenu for that specific zone.
Once in the submenu you can turn that specific zone ON or OFF, select
the color for that zone (or choose LOOP to cycle through all the colors),
adjust the brightness of the color with the Dimmer function or return to
the main Lighting Options menu.
Dimmer sequence is: Dimmer 3 = high light level, Dimmer 2 = medium
light level, and Dimmer 1 = low light level.
Color sequence is: 1) Indigo 2) Aqua 3) Emerald 4) Gold 5) Ruby
6) Magenta 7) Loop On 8) Loop Off
ADDITIONAL FUNCTIONS
SUMMER TIMER
Your spa is equipped with a summer timer. The summer timer can be
activated during hot summer months to maintain water temperature.
Activating the summer timer causes the heater to immediately shut
down. The circulation pump will remain on for approximately 5 minutes
pushing water through the heater to cool it down. Both heater and
circulation pump will then remain off for eight hours. The summer
timer icon will be displayed on the main control panel and will remain
displayed for as long as the summer timer mode is on. The circulation
pump and heater will automatically shut down for the same eight hours
every day until the summer timer is deactivated. It is recommended to
activate the summer timer in the morning so that the spa is off during the
hottest part of the day and so that the circulation pump will start up again
in the evening when you are ready to enjoy the spa.
IMPORTANT: The summer timer will not lower the spa’s water
temperature below the ambient air temperature. Ambient conditions,
including humidity, wind and shading will affect your spa water
temperature.
To activate the Summer Timer, simply follow these steps:
Press the OPTIONS Hard button on
the Main Control panel.
Press the soft button next to Set up.
Press the soft button next to Summer
Timer to activate. The Summer timer
icon will display when activated.
IMPORTANT: If water temperature
falls below 26.7°C (80°F) the summer timer will automatically be
disabled.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caldera Utopia serie - 2017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caldera Utopia serie - 2017 in the language / languages: English as an attachment in your email.

The manual is 6.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Caldera Utopia serie - 2017

Caldera Utopia serie - 2017 User Manual - German - 44 pages

Caldera Utopia serie - 2017 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info