784911
18
Zoom out
Zoom in
Previous page
1/44
Next page
Page 15
Operating Instructions
TEMPERATURE CONTROL
Press the actual temperature on Home screen to
display Set Temperature screen.
The set temperature range is from
26°C to 40°C (80°F to 104°F).
NOTE: The water temperature
may vary depending on the current
use and condition of your spa and
outside temperatures.
The factory set temperature of the spa water is 38°C (100°F).
The last temperature value set by the user will be stored in memory. If
power is disconnected from the spa, it will automatically revert to the last set
temperature when power is reapplied.
Press to raise set temperature of spa. Press and hold to
raise the temperature continuously.
Press to lower set temperature of spa. Press and hold to
lower the temperature continuously.
MEMORY SCREEN
Press
38.5C
on Home screen to display Memory screen.
Press to activate the last saved set of
operating functions.
Press to save the current set of operating
functions (jets and lights only).
Press to return to home screen if neither
of the above buttons are used. Screen
will automatically revert back after 10
seconds of non activity.
CLEAN CYCLE SCREEN
Press
on Home screen to display Clean Cycle screen.
AUTO
CLEAN CYCLE:
START
ONOFF
VANISHING ACT®:
START
Press to start the
manual Clean Cycle.The screen
will briefly display CLEAN
CYCLE: ACTIVE. Activates jet
pump 1 on high speed for a ten
minute period.
AUTO
CLEAN CYCLE:
START
ONOFF
Press & hold to activate and deactivate the Auto
Clean Cycle. If activated, a clean cycle will run every
24 hours starting at the time ON was first pressed
(runs Jet 2 for 1 minute and Jet 1 for 9 minutes)
Press to return to Home screen. Screen will
automatically revert back after 10 seconds of non
activity.
VANISHING ACT CYCLE
Press
on Home screen to display the VANISHING ACT screen.
Press to start the VANISHING ACT cycle activating the
low speed jet pump for
6 hours, ONLY to be used with
VANISHING ACT (see page 11)
SETTINGS SCREENS
Press
on Home screen to display first Settings Screen.
The first Settings screen allows you
to turn Temperature Lock, Spa Lock,
lights Timer and Summer Timer On
or Off.
TEMPERATURE LOCK
Press
on Home screen to display Temperature Lock.
The Temperature Lock feature prevents changing the desired water
temperature setting. All other
control panel functions will operate
normally while the Temperature
Lock is "ON".
Press and hold ON or OFF for approximately 4 seconds to
activate or deactivate.
SPA LOCK
Press
on Home screen to display Spa Lock.
When activated, the Spa Lock feature disables all functions on the control
panel.
The control panel will not respond
to anything except
on the
Home screen.
Press and hold ON or OFF for approximately 4 seconds to
activate or deactivate.
LIGHTS TIMER
Press
on Home screen to display Lights Timer.
When activated, the exterior lights of the spa will come on 5 seconds
later will remain lit for 6 hours and
repeat the cycle every 24 hours
from activation time.
Press ON or OFF to activate or deactivate.
SUMMER TIMER
Press
on Home screen to display Summer Timer.
The Summer Timer can be activated during extremely hot summer
months to help maintain set water
temperatures.
Activating the Summer Timer causes the heater to immediately
shut down. The circulation pump will remain on for approximately 5
minutes pushing water through the heater to cool it down.
SET TEMPERATURE
c
38.0
38.5
C
MEMORY:
RESTORE
SAVE
SETTINGS
TEMPERATURE LOCKOFF ON
SPA LOCKOFF ON
LIGHTS TIMEROFF ON
SUMMER TIMEROFF ON
SETTINGS
TEMPERATURE LOCKOFF ON
SPA LOCKOFF ON
LIGHTS TIMEROFF ON
SUMMER TIMEROFF ON
SETTINGS
TEMPERATURE LOCKOFF ON
SPA LOCKOFF ON
LIGHTS TIMEROFF ON
SUMMER TIMEROFF ON
SETTINGS
TEMPERATURE LOCKOFF ON
SPA LOCKOFF ON
LIGHTS TIMEROFF ON
SUMMER TIMEROFF ON
SETTINGS
TEMPERATURE LOCKOFF ON
SPA LOCKOFF ON
LIGHTS TIMEROFF ON
SUMMER TIMEROFF ON
AUTO
CLEAN CYCLE:
START
ONOFF
VANISHING ACT®:
START
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caldera Utopia - serie 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caldera Utopia - serie 2020 in the language / languages: English as an attachment in your email.

The manual is 10.14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Caldera Utopia - serie 2020

Caldera Utopia - serie 2020 User Manual - German - 44 pages

Caldera Utopia - serie 2020 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info