773293
20
Zoom out
Zoom in
Previous page
1/60
Next page
20
Descaling
Descaling signal: When the indicator D blinks YELLOW and 3 beeps sound, it is advisable
to carry out the descaling cycle, as described below.
The machine features an advanced program that monitors how much water is used
to dispense beverages. This monitoring process provides the user with indications
as to when the machine needs to be descaled.
It is advisable to use the Caf taly System descaling agent, designed to comply with
the technical characteristics of the machine, in full observance of consumer safety. The
descaling agent must be disposed of in compliance with the manufacturer's instructions
and/or the current regulations in force in the country where the appliance is used.
CAREFULLY read the precautions provided on the descaling product package.
Avoid contact with eyes, skin and machine surfaces.
Switch the machine off during descaling, and do not lift the lever. A person must be
present during the operation.
Do not use vinegar: it could damage your machine!
Switch the machine off by pressing the power on/off switch (Fig. 14).
Empty and rinse the used capsule drawer and drip tray (Fig. 6).
Remove and empty the water tank (Fig. 5).
Mix the contents of a bottle of Caf taly System descaling agent with approximately 750
cc. of water (a total of 1 litre) and pour into the tank.
Make sure the lever is lowered (Fig. 3) and that there is no capsule inside the capsule
compartment.
Remove the drip-tray (Fig. 15).
Place a container (at least 500 ml) under the dispenser (Fig. 16).
Press and hold buttons A and B while switching the machine on by pressing the main
switch.
• The button B is lit up, whereas the indicator D blinks YELLOW and REDalternately.
• Press button B to start the descaling cycle.
The machine dispenses the descaling solution at intervals (5 dispensings with a pause
of 4 minutes, for a duration of approx. 25 minutes). During this phase, in which the
buttons must not be pressed, the indicator D blinks YELLOW and RED alternately.
If the container lls up, empty it.
• When the rst phase is completed, the button B lights up and a beep sounds. The water
tank is empty.
Carefully rinse the water tank and re ll it with fresh water (Fig. 4).
Empty and rinse the used capsule drawer and the container used, and put them back in
place (Fig. 16).
Press the button B to start the rinse cycle.
Rinse water (about 500 ml) will be run through the machine. During this phase the
indicator D blinks YELLOW and RED alternately.
When the rinse cycle is completed, a beep sounds and the buttons A-B-C blink
simultaneously; the machine is in the heating phase
When the buttons light up steady and 2 beeps sound, the appliance is ready to use.
Carefully empty and rinse the water tank and re ll it with fresh, plain water (Fig. 4).
Empty and rinse the used capsule drawer and put it back together with the drip tray.
English
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caffitaly S16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caffitaly S16 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info