773308
20
Zoom out
Zoom in
Previous page
1/24
Next page
20
Descaling
Descaling signal: when warning light E blinks YELLOW and the machine beeps 3 times, a
descaling cycle should be carried out, as illustrated below.
The machine features an advanced program that monitors how much water is used
to dispense beverages. This measurement provides the user with indications as to
when the machine needs to be descaled.
It is advisable to use the Caf taly System descaling agent. It is designed to comply with
the technical characteristics of the machine, in full observance of consumer safety. The
descaling agent must be disposed of in compliance with manufacturer instructions
and/or with current regulations in force in the country where the appliance is used.
CAREFULLY read the directions for use on the packaging of the descaling agent.
Avoid contact with eyes, skin and machine surfaces. Switch the machine off during
descaling, and do not lift the lever. A person must be present during the operation.
Do not use vinegar: it could damage your appliance!
Switch the machine off by pressing the power on/off switch (Fig. 14).
Empty and rinse out the used capsule drawer and drip tray (Fig. 6).
Remove and empty the water tank (Fig. 5).
Mix the contents of a bottle of Caf taly System descaling agent with approximately
750 cc. of water (a total of 1 litre) and pour into the tank.
Place a container (at least 1 litre) under the dispensing spout (Fig. 9).
Make sure that the lever is lowered (Fig. 3) and there is not a capsule inside the capsule
compartment.
Press and hold buttons A and B while switching the machine on by pressing the power
on/off switch.
• Button B will light up, while warning light E blinks YELLOW and RED alternately.
• Press button B to start the descaling cycle.
The machine dispenses the descaling solution at intervals (5 doses with a 4-minute
pause between each one, for a total duration of about 25 minutes). During this step,
when the buttons must not be pressed, warning light E blinks YELLOW and RED
alternately.
• When the rst phase is over, button B lights up and the machine beeps repeatedly. The
water tank is empty.
Carefully rinse out the water tank and re ll it with fresh water (Fig. 4).
Empty and rinse the used capsule drawer, the drip tray and the container used and put
them back in place (Fig. 15).
• Press button B to start the rinse cycle.
Rinse water (about 500 ml) will be run through the machine. During this step, warning
light E blinks alternately (twice YELLOW and twice RED).
When the rinse cycle is complete, the machine beeps and buttons A-B-C blink
simultaneously; the machine is warming up. When the buttons turn on and remain steadily
lit, the appliance is ready for use.
Carefully empty and rinse out the water tank and re ll it with fresh, still water (Fig. 4).
Empty and rinse out the used capsule drawer and drip tray (Fig. 6).
English
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caffitaly S05 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caffitaly S05 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info