773307
4
Zoom out
Zoom in
Previous page
1/8
Next page
4
Operation of your milk frother
I. Frothing and heating
1. Place the appliance on a at surface.
2. Select frothing paddle, then open the lid and insert the frothing paddle onto the shaft on
the bottom of jar.
3. Fill the jar with the desired amount of milk, and replace the lid, observing ll lines
Note: the max milk quantity permitted to add is 100ml, to avoid milk over owing after
frothing.
4. Place the jar on the power base and connect the plug into a power outlet, the indicator
light will turn red.
5. Press the power button once, the indicator light will turn blue. Then the appliance will
start to work. Once the temperature of milk has achieved approximately 68 Degrees, the
heating element will stop heating and the frothing paddle will stop rotating automatically;
the indicator will illuminate red again until unplugging the power outlet.
Note: During operation, you can stop operating by pressing the power button once.
6. When the appliance has stopped operating, pour out the warmed and frothed milk to
enjoy it.
Caution: A minimum of 3 minutes rest time must be maintained between cycles. Otherwise
after 5 continuos cycles continuously the appliance will enter self protection mode. When
this occurs, the indicator light will illuminate and ash blue. In addition the power button will
not be activated.
After Approximately 5 minutes the appliance will enter standby mode and the machine is
then ready for use.
7. Always turn off the milk frother and disconnect the power supply when not use
II. Only frothing separately, without heating.
1. Following steps 1-4 in the section of “Frothing and heating”.
2. Press the power button three times continuously within 2 seconds, the indicator light will
illuminate blue and ash, the frothing paddle will then rotate for frothing milk separately,
but the heating element will not heat. The appliance will automatically stop rotating after
operating. The indicator light will illuminate red again until unplugging the power outlet.
Note: During operation, you can stop frother by pressing the power button once.
3. When the appliance has stopped operating, pour out the frothed milk and enjoy it.
Caution: A minimum of 3 minutes rest time must be maintained between cycles. Otherwise
after 5 continuos cycles continuously the appliance will enter self protection mode. When
this occurs, the indicator light will illuminate and ash blue. In addition the power button will
not be activated.
After Approximately 5 minutes the appliance will enter standby mode and the machine is
then ready for use.
4. Always turn off the milk frother and disconnect the power supply when not use.
English
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caffitaly F02MK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caffitaly F02MK in the language / languages: English as an attachment in your email.

The manual is 0.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info