804700
8
Zoom out
Zoom in
Previous page
1/16
Next page
7
Changing the Air Volume
Press the air volume button ( ).
Air volume and operation mode cannot be confi gured
simultaneously.
Each time the air volume button is pressed, it makes a beeping
sound and the air volume mode changes.
The indicator of the selected air volume will light up.
Operation continues with the selected air volume.
Selecting the Operation Time
Press the timer button ( ).
Each time the timer button is pressed, it makes a beeping
sound and the time setting changes.
The indicator of the selected timer will light up.
1h 4h 8h Off
The timer setting will be deactivated when the timer is off.
Turning off the Odor and Dust
Monitor and Air Inlet Lamps
Press the light button ( ).
If the light button is pressed during operation, there will be a
beeping sound and the odor and dust monitor and air inlet
lamps will turn off.
If the light button is pressed again, the odor and dust monitor
and the air inlet lamps will light up again.
Note
The inlet lamps will not turn off completely even after the light button is
pressed. This light is from the photocatalytic lamp.
How to Operate
Starting the Unit
Plug the power plug into the wall outlet.
All indicators and buttons on the control panel along
with the odor and dust monitor and the air inlet lamps will
momentarily light up then turn off.
Press the power button ( ).
After it beeps, all of the buttons on the control panel along
with the automatic indicator, odor and dust monitor, and the
air inlet lamps will light up.
If the power button is pressed while the unit is still operating, the
lit buttons, indicators, odor and dust monitor, and the air inlet
lamps will turn off and then the unit will stop operating.
Selecting the Operation Mode
Press the mode button ( ).
The operation mode and air volume cannot be set simultaneously.
Each time the mode button is pressed, it makes a beeping
sound and the operation mode changes.
The indicator of the selected mode will light up.
About operation mode
Auto-
matic
Normally use this mode.
The room condition is detected with the odor and dust
sensors, and the air volume setting switched between
low, middle, and high.
Eco Used in situations with low volumes of air pollutants,
such as at night.
Only the power button and eco-mode indicator light up
and the unit operates with low air volume setting. (The
photocatalytic lamp is also off.)
Rapid Use this mode if you want to quickly clean the air.
The unit operates with an air volume stronger than the
high air volume setting for 2 hours, then changes to
automatic mode.
1
2
Power
button
Mode
button
Air volume
button
Timer
button
Light
button
Air volume indicator
Timer indicatorMode indicator
Automatic
Eco
High
Middle
Low
Rapid
Illumination intensity sensor
page 5
Filter replacement indicator
page 9
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cado AP-C710S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cado AP-C710S in the language / languages: English as an attachment in your email.

The manual is 2.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info