694401
29
Zoom out
Zoom in
Previous page
1/48
Next page
29
WALL
3
PLUS - LEAN
3
PLUS - MOON - TILE
3
PLUS
EN
j - Components Test
To activate the “Components Test” function (only when the boiler is switched off) act as follows:
Press the “menu” button.
Scroll to “Settings” using the arrows
Press “menu” to conrm.
Scroll to “Components Test” using the arrows.
Press “menu” to conrm.
Select the test to be performed with the + - keys
Press “menu” to conrm and “esc” to exit
k - “Chimney Sweep Function"
To activate the “Chimney Sweep Function” function act as follows:
Press the “menu” button.
Scroll to “Settings” using the arrows
Press “menu” to conrm.
Scroll to the “Chimney Sweep Function” function using the arrows.
Press “menu” to conrm.
Select “On” with the + - keys (Off by default)
Press “menu” to conrm and “esc” to exit
l - Technical Menu
To access the technical menu one must contact an assistance centre as one needs a password to enter.
To intervene on the “Technical Menu” act as follows:
Press the “menu” button.
Scroll to “Settings” using the arrows
Press “menu” to conrm.
Scroll to “Technical Menu” using the arrows.
Press “menu” to conrm.
Select “Product Type”, “Service”, “Status Memory”, “Parameters” with the + - keys.
Press “menu” to conrm and “esc” to exit
12.6 INFO MENU
Product Type
Firmware Version
Software info
Total hrs.
Ignition N.
Rpm Smoke Fan
Smoke Temp.
Air Fan Voltage
Screw Loading
Fire
12.7 START UP
We remind you that the rst ignition must be carried out by a specialized and authorixed technician who will
check that all is installed in compliance with current regulations and checks the efciency.
If inside the combustion chamber there are booklets, manuals, etc..., remove them.
Check if the door is correctly closed.
Check if the stove is correctly inserted in the electric socket.
Before switching the stove on, assure you the burning pot is clean.
To start the stove, keep the P1 button pressed until the ON sign and a ashing ame to its side appear. The
ignition resistance pre-heating starts. After some seconds the feed screw loads pellets and the resistance pre-
heating continues. When the temperature is high enough (after about 5-8 minutes), ignition is considered to
be completed.
Once the ignition step is complete, the stove moves into operating mode and shows the selected heat
output, the ambient temperature and the big ame (see Fig. 53 page 29).
If the ambient temperature value exceeds the limit set on the button panel in the temperature set, the heat
output is brought to its lowest value and the small ame is shown (see Fig. 54 page 29). When the ambient
temperature decreases below the set temperature, the stove goes back to the set output.
Fig. 53 - Big ame Fig. 54 - Small ame
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cadel Wall3 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cadel Wall3 Plus in the language / languages: English as an attachment in your email.

The manual is 21,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cadel Wall3 Plus

Cadel Wall3 Plus User Manual - German - 48 pages

Cadel Wall3 Plus User Manual - Dutch - 48 pages

Cadel Wall3 Plus User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info