815105
16
Zoom out
Zoom in
Previous page
1/36
Next page
CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9
16
Press “menu to confirm.
Modify the % with the + - keys.
Press “menu to confirm and esc” to exit
i - Smoke Fan rpm
To change the parameter act as follows:
Press the “menu button.
Scroll to “Settings” using the arrows
Press “menu to confirm.
Scroll to “Smoke Fan rpm” using the arrows.
Press “menu to confirm.
Modify the % with the + - keys.
Press “menu to confirm and esc” to exit
j - Components Test
To activate the “Components Test function (only when the boiler is switched off) act as follows:
Press the “menu button.
Scroll to “Settings” using the arrows
Press “menu to confirm.
Scroll to “Components Test using the arrows.
Press “menu to confirm.
Select the test to be performed with the + - keys
Press “menu to confirm and esc” to exit
k - “Chimney Sweep Function"
To activate the “Chimney Sweep Function” function act as follows:
Press the “menu button.
Scroll to “Settings” using the arrows
Press “menu to confirm.
Scroll to the “Chimney Sweep Function” function using the arrows.
Press “menu to confirm.
Select “On” with the + - keys (Off by default)
Press “menu to confirm and esc” to exit
l - Technical Menu
To access the technical menu one must contact an assistance centre as one needs a password to enter.
8.5 INFO MENU
Product Type
Firmware Version
Software info
Total hrs.
Ignition N.
Rpm Smoke Fan
Smoke Temp.
Air Fan Voltage
Screw Loading
Fire
8.6 IGNITION OF THE STOVE
We remind you that the first ignition must be carried out by a specialized and authorixed technician who will check that all is
installed in compliance with current regulations and checks the efficiency.
If inside the combustion chamber there are booklets, manuals, etc..., remove them.
Check if the door is correctly closed.
Check if the stove is correctly inserted in the electric socket.
Before switching the stove on, assure you the burning pot is clean.
To start the stove, keep the P1 button pressed until the ON sign and a flashing flame to its side appear. The ignition resistance
pre-heating starts. After some seconds the feed screw loads pellets and the resistance pre-heating continues. When the tem-
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cadel STEEL 9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cadel STEEL 9 in the language / languages: English as an attachment in your email.

The manual is 0.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cadel STEEL 9

Cadel STEEL 9 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info