696340
31
Zoom out
Zoom in
Previous page
1/47
Next page
31
KRISS
3
- TECNA
3
- EVO
3
- ELISE
3
- SHELL
3
- CRISTAL
3
- GLASS - VERVE AT - PRETTY AT - TITANIA AT - VENERE AT - BREEZE AT
Please further assure you that your network is endowed with an efficient earth connection: if it does not exist or if it is not
efficient, please endow you with one in compliance with the law.
Connect the supply cable first on the back of the stove (see Fig. 74) and then at a wall electric socket.
Fig. 74 - Electric socket with master switch
The master switch O/I (see Fig. 74) is to open only to switch the stove on, otherwise it is advisable to keep it off.
Do not use extension cables.
If the feeder cable is damaged, it must be replaced by an authorized technician.
When the stove is not going to be used for a long period of time, it advisable to remove the plug from the socket on the wall.
5.17 CONNECTION TO THE EXTERNAL THERMOSTAT
The stove works through a thermostat probe placed in its inner. If you desire, the stove can be connected to an external room
thermostat. This operation must be executed by an authorized technician.
Connect the wires from the external thermostat to the "Term opt" terminal on the stove board. Activate the external thermostat
(default setting OFF) as indicated below:
Press the "menu" button.
Scroll with the arrows to "Settings".
Select by pressing "menu".
Scroll with the arrows again to "Ext.Thermostat".
Select by pressing "menu".
Press the - + buttons.
To activate the external thermostat select "on".
Press the "menu" button to confirm.
5.18 STOVE CALIBRATION AND DEPRESSION MEASUREMENT
This stove has a pickup point positioned on the tank in order to measure the depression of the combustion chamber and verify its
proper operation.
To do this, proceed as follows:
Remove inspection casing "C" from the back of the stove (see Fig. 75).
Loosen nut "D" from the bottom of the tank, near the pressure switch.
Connect a digital pressure switch with a tube to detect the depression (see Fig. 76).
Load the feed screw via appropriate function.
Start the stove and set "Fire" at power 1 (the start of this stove lasts from 8 to 10 minutes to ensure minimum draught).
Compare the read values with those on the table.
Change power every 10 minutes and wait for it to stabilise.
Access the user menu and, if necessary, change the parameters.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cadel Shell 3 - 2019 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cadel Shell 3 - 2019 in the language / languages: English as an attachment in your email.

The manual is 7,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cadel Shell 3 - 2019

Cadel Shell 3 - 2019 User Manual - English - 44 pages

Cadel Shell 3 - 2019 Installation Guide - German - 48 pages

Cadel Shell 3 - 2019 User Manual - German - 44 pages

Cadel Shell 3 - 2019 Installation Guide - Dutch - 48 pages

Cadel Shell 3 - 2019 User Manual - Dutch - 44 pages

Cadel Shell 3 - 2019 Installation Guide - French - 60 pages

Cadel Shell 3 - 2019 User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info