694409
24
Zoom out
Zoom in
Previous page
1/32
Next page
RONDO
3
- FLUTE
20
Fig. 19 - Burning pot extraction Fig. 20 - Ash tray extraction Fig. 21 - Burning pot cleaning
Extract the burning pot (see Fig. 19) from its seat and empty it from the ash.
Extract the ash tray (see Fig. 20) and empty it from the ash
If becessary clean with a pointed object the holes obstructed by encrustations (see Fig. 21).
Fig. 22 - Burning pot box cleaning Fig. 23 - Cleaning with a brush
Clean and drain away the burning pot and the ash tray from ash which has accumulated in its inner (see Fig. 22).
Clean also the hole for pellet drop with a brush (see Fig. 23).
The ash remains must be poured in a metal container with a sealed lid and this container must never get in touch with combu-
stible materials (for example put on a wooden floor), as the inner ash keeps the embers firing for a long time.
Only when the embers are off the ash coul be poured in the organic waste.
Pay attention if the flame becomes red colured, if it is weak or if black smoke creates in the inner: in this case the burning pot
is encrusted and needs to be cleaned. If it is broken, it must be replaced.
11.3 BEFORE EACH STARTUP
Clean the ash and any deposits in the brazier that could clog the air passage holes.
If the pellets in the hopper finish, unburned pellets may accumulate in the brazier. Always empty the residue in the brazier before
startingup.
Check that there is no excessive ash accumulated under the burning pot compartment. If it exceeds 2 cm of height, we recommend
sucking it.
REMEMBER THAT ONLY A CORRECTLY POSITIONED AND CLEAN BRAZIER CAN GUARANTEE START-UP AND OPTI-
MAL OPERATION OF YOUR PELLET PRODUCT.
For the brazier to be cleaned properly, remove it from its housing completely and thoroughly clean all the holes and the grate on
the bottom.
If good quality pellets are used, you will normally only need to use a brush to restore the optimal operating conditions of the
component.
11.4 HOPPER AND AUGER CLEANING
Per each pellets supply, check the probable presence of meal, sawdust and other remanins on the hopper bottom. If present, they
must be removed with the aid of a vacuum cleaner (see Fig. 24 ).
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cadel Rondo3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cadel Rondo3 in the language / languages: English as an attachment in your email.

The manual is 7,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cadel Rondo3

Cadel Rondo3 Installation Guide - English - 28 pages

Cadel Rondo3 Installation Guide - German - 28 pages

Cadel Rondo3 User Manual - German - 32 pages

Cadel Rondo3 Installation Guide - Dutch - 28 pages

Cadel Rondo3 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info