814945
21
Zoom out
Zoom in
Previous page
1/36
Next page
21
KOBE - FENICE - SPARK - INDACO - PRINCE - GO - ECLIPSE
Caution, before changing the stoves programming :
It is recommended to change the factory settings under the supervision of an authorised technician.
Before installation, ensure the flue has been installed and certified by suitable personnel according to the legal provisions in
force.
Examples of available “Easy Set configurations compared to «typical» installation of reference:
SET 0 : Default parameters
SET 1 : Vertical exhaust
SET 2 : Concentric vertical exhaust (mainly used in France)
SET 3 : Horizontal concentric wall exhaust (only used and permitted in France)
SET 4 : Smoke fitting with horizontal section
Fig. 23 - Ensemble d'exemples
LEGENDA Fig. 23
ASmoke Outlet
BCombustion Air Intake
TInspection cap
8.17 PELLETS RECIPE SEE SECTION H SETTINGS MENU A PAG. 14
Changes to be made with the support of the authorised technician.
Activates only with the Easy Set function disabled, "SET: 0" !
This function is for adapting the stove to the pellets that are being used. In fact, as there are several types of pellets on the market,
boiler operation is extremely variable depending on the fuel quality. In the event the pellets tend to clog the brazier due to an
excessive load of fuel or in the event the flame is always high even at low powers and, vice versa if the flame is low one can decre-
ase/increase the amount of pellets in the brazier:
The available values are:
-30= 30% reduction with respect to the default setting.
-25= 25% reduction with respect to the default setting.
-20= 20% reduction with respect to the default setting.
-15 = 15% reduction with respect to the default setting.
-10= 10% reduction with respect to the default setting.
-5= 5% reduction with respect to the default setting.
0= No variation.
+5= 5% increase with respect to the default setting.
+10 = 10% increase with respect to the default setting.
+15 = 15% increase with respect to the default setting.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cadel PRINCE PLUS 11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cadel PRINCE PLUS 11 in the language / languages: English as an attachment in your email.

The manual is 0.65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cadel PRINCE PLUS 11

Cadel PRINCE PLUS 11 User Manual - German - 37 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info