Manual Cadel Lean3 Plus (page 38 of 48) (English)

694402

Zoom out

Zoom in

1/48

WALL

PLUS - LEAN

PLUS - MOON - TILE

PLUS

• Clean and drain away the burning pot box and ash tray box from ash which has accumulated in its inner (see

Fig. 72 page 37 and Fig. 73 page 37).

• Clean also the hole for pellet drop with a brush (see Fig. 74 page 37).

• The ash remains must be poured in a metal container with a sealed lid and this container must never get in

touch with combustible materials (for example put on a wooden oor), as the inner ash keeps the embers

ring for a long time.

• Only when the embers are off the ash coul be poured in the organic waste.

• Pay attention if the ame becomes red colured, if it is weak or if black smoke creates in the inner: in this case

the burning pot is encrusted and needs to be cleaned. If it is broken, it must be replaced.

14.3 HOPPER AND AUGER CLEANING

Per each pellets supply, check the probable presence of meal, sawdust and other remanins on the hopper

bottom. If present, they must be removed with the aid of a vacuum cleaner (see Fig. 75 page 38 ).

Fig. 75 - Hopper and auger cleaning

14.4 FUME CHAMBER CLEANING

Every season (or every 1500 operation hours) the fume chamber and the fume passages cleaning must be

executed.

• Remove the left front panel, see PANEL ASSEMBLY (WALL3 PLUS MODEL) page 21, PANEL ASSEMBLY (LEAN3

PLUS MODEL) page 21 and PANEL ASSEMBLY (MOON MODEL) page 22

Fig. 76 - Heat protection panel removing Fig. 77 - Inspection panel removing

• Unscrew the 2 screws from the galvanised panel (see Fig. 76 page 38).

• Remove the inspection panel (see Fig. 77 page 38).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cadel Lean3 Plus in the language / languages: English as an attachment in your email.

The manual is 21,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cadel Lean3 Plus

Cadel Lean3 Plus User Manual - German - 48 pages

Cadel Lean3 Plus User Manual - Dutch - 48 pages

Cadel Lean3 Plus User Manual - French - 52 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cadel Lean3 Plus Manual

Product: