643494
28
Zoom out
Zoom in
Previous page
1/56
Next page
28
AQUOS - IBIS - IDRON
EN
10
INITIAL START-UP
10.1 GENERAL PRECAUTIONS
Remove all components that could burn from the brazier and glass (manual, various adhesive labels and any
polystyrene).
Check that the brazier is positioned correctly and rests properly on the base.
Fig. 26 - Check the brazier
After a long period of inactivity, remove any pellets left in the hopper (using a vacuum
cleaner with a long pipe ), as they could have absorbed moisture, thereby altering their
original characteristics and no longer being suitable for combustion.
The rst start-up may not be successful as the feed screw is empty and does not always
manage to load the required amount of pellets in the brazier in time for the re to be
regularly ignited.
CANCEL THE FAILED START-UP ALARM STATUS BY PRESSING AND HOLDING KEY 1 (ESC).
REMOVE THE PELLETS FROM THE BRAZIER AND REPEAT START-UP.
If a ame does not ignite after a number of failed start-ups, even though the pellet supply is correct, make sure
the brazier is set in place correctly, which must be interlocked in its seat and free from any ash deposits. If no
anomaly is found during this inspection, there may be a problem with the product components or installation
may not be correct.
REMOVE THE PELLETS FROM THE BRAZIER AND CONTACT AN AUTHORISED TECHNICIAN.
Avoid touching the boiler during the initial start-up, as the paint in this stage hardens; by
touching the paint, the steel surface may be exposed.
It is good practice to guarantee effective ventilation in the room during the initial start-up,
as the boiler will emit some smoke and smell of paint.
Do not stand close to the product and air the room. The smoke and smell of paint will disappear after about an
hour of operation, however, remember they are not harmful in any case.
The boiler will be subject to expansion and contraction during the start-up and cooling phases, therefore slight
creaking noises may be heard.
This is absolutely normal as the structure is made of laminated steel and must not be considered a defect.
It is extremely important to make sure the boiler is not immediately overheated and the temperature is increased
gradually, initially using low power.
This will prevent damaging the ceramic or serpentine tiles, the welds and the steel structure.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cadel Ibis 22 H2O at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cadel Ibis 22 H2O in the language / languages: English as an attachment in your email.

The manual is 6,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cadel Ibis 22 H2O

Cadel Ibis 22 H2O Usermanual and installation guide - German - 56 pages

Cadel Ibis 22 H2O Usermanual and installation guide - Dutch - 56 pages

Cadel Ibis 22 H2O Usermanual and installation guide - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info