580293
46
Zoom out
Zoom in
Previous page
1/55
Next page
NetworX gebruikershdl 10/09/2003 Data and design are subject to change without notice / Supply subject to availability 46
© Copyright - Details as per general conditions of supply, 1998
4.5. Gebruik van LCD codeklavier in systeem met partities
Als uw systeem uit meerdere partities (secties) bestaat en wanneer het codeklavier tot één
bepaalde partitie behoort, dan zal dit codeklavier ALLEEN de status van de zones van de
betreffende partitie tonen zoals reeds beschreven in paragrafen 4.3 en 4.4.
Wanneer het codeklavier (door uw installateur) geprogrammeerd werd om te werken in de
“hoofdmode” (master mode) dan geeft het LCD scherm de status van elke partitie weer en kan
men commando’s uitvoeren in elke partitie (op voorwaarde dat uw code hiervoor toelating heeft).
Met de instructie [*][1] kan elk codeklavier tijdelijk in de “hoofdmode” geplaatst worden (alleen
NX148). Hierbij zal het codeklavier 60 seconden na een toetsaanslag terugkeren naar de
standaardpartitie. Zonder toetsaanslag, keert het codeklavier reeds na 10 seconden terug naar de
standaardpartitie.
Lees aandachtig de volgende paragrafen om er zeker van te zijn dat u alle schermboodschappen
begrijpt.
Opmerking: in de hieronderstaande tabel kunt u het maximum aantal partities per type
centrale terugvinden.
Type centrale Max. aantal partities
NX-4 1
NX-6 2
NX-8 8
NX-8PLUS 8
4.5.1. Betekenis van de lampjes (LED’s) in de “hoofdmode”
AAN*: zal oplichten als alle
partities ingeschakeld (gewapend) zijn.
GEREED*: zal oplichten als alle
partities gereed zijn om ingeschakeld te worden.
Het GEREED lampje zal knipperen als alle partities gereed zijn om
geforceerd ingeschakeld te worden.
BRAND*: zal oplichten als er een brandalarm optreedt in een willekeurige partitie.
Het BRAND lampje zal knipperen als er een brandstoring optreedt in een
willekeurige partitie.
VOEDING*: zal oplichten als de netspanning aangesloten is op de centrale.
Het VOEDING lampje zal knipperen als er een batterijfout optreedt. Het
VOEDING lampje zal gedoofd zijn als er geen netspanning aanwezig is.
AANWEZIG/STAY: zal oplichten als een willekeurige partitie ingeschakeld is in de
AANWEZIG/STAY mode.
DEURBEL*: zal oplichten als de DEURBEL mode geactiveerd is in een willekeurige
partitie
AFWEZIG/AWAY: zal oplichten als de uitgangstijd actief is in een willekeurige partitie. Het
AFWEZIG/AWAY lampje
zal knipperen als een willekeurige partitie zich in de laatste 10 seconden
van de uitgangstijd bevindt.
BLOKKAGE/BYPASS:zal oplichten als een zone geblokkeerd werd in een willekeurige partitie.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caddx NX-4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caddx NX-4 in the language / languages: Dutch as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info