Manual Cadac Skottel Braai 50 - 8309T-13 (page 10 of 146) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish, Norwegian, Finnish)

820004

Zoom out

Zoom in

1/146

Fig 6

6. Cleaning

• Allow the appliance to cool down before you clean it.

• Use a damp cloth wrung out in a solution of soapy water to clean exterior surfaces.

• The grill plate is coated with a tough durable ceramic non-stick coating that has been used with great success on some of the best cookware

in the world. Never the less, taking care of it can help you to enjoy extra years of healthy, easy, non-stick cooking.

• Whilst the ceramic non-stick coating is very durable, it can easily be damaged by the use of metal cooking utensils. It is therefore

recommended that only plastic or wooden utensils be used when cooking.

• Always allow the grill/Paella Pan to cool before immersing it in water.

• Make sure that no water gets onto the burner or pilot/light area. Wipe the appliance completely dry before use.

• Do not use abrasive cleaners as they may damage the surfaces.

• Clean the appliance aer each use. Aer cleaning recondition the cooking surface with a light wipe of oil.

• Do not use any high-pressure steam equipment or a water jet to clean the appliance.

• Note: For stubborn stains, oven cleaner may be used.

7. Storage

• Always allow the unit to cool down and be cleaned before storing.

• Turn oﬀ the gas supply to the appliance, disconnect and remove the gas supply from the appliance.

• Never store an appliance with the gas supply connected, this is an unsafe practice.

• Store the appliance and gas supply in a well-ventilated area away from combustible material. Storage of cylinders should preferably be

outdoors and must NOT be in a basement.

8. Maintenance & troubleshooting

Maintenance

• If you clean and maintain your appliance on a regular basis, the life of your appliance will extend and the possibility of problems will

decrease.

• We recommend the service of your appliance to be every twelve (12) months by a service agent to ensure continued eﬃcient operation.

• This appliance must only be serviced by an authorized person.

• Check your gas hose and connections regularly for any signs of leaks and every time the gas cylinder is re-ﬁlled or ﬁtted to the appliance

with every use.

Troubleshooting

In the case of a spattering ﬂame or jet blockage:

• Clean your burner ports in case of an over spill.

• We recommend to clean or replace the jets every six (6) months to ensure continued eﬃcient operation of your appliance.

• Should the appliance operate abnormally aer storage and all checks have not isolated the problem, the venturi may be blocked. A

blocked venturi would be indicated by a weaker yellowish ﬂame or no ﬂame at all in extreme cases. Under these circumstances it will be

necessary to remove and check and thoroughly clean out any foreign matter which may have gathered in the appliance.

• This may be done by removing the jet using standard tools and blow any dirt from the jet, alternatively, you may purchase new jets from

your local store. Do not attempt to clean the jet mechanically.

Replacing a blocked jet:

• Your appliance is ﬁtted with a speciﬁc size jet (O) to regulate the correct amount of gas.

• Should the hole in the Jet (O) become blocked, this may result in a small ﬂame or no ﬂam

at all. Do not attempt to clean the Jet (O) with a pin or other such device as this may damage

the oriﬁce, which could make the appliance unsafe.

• To replace the Jet (O):. Unscrew the 3 screws on the bottom housing cover and remove cover.

• Remove Valve base plate assembly by unscrewing the six self-tapping screws ﬁxing it to the

tripod housing (J) and subsequently remove the valve (M) from the housing simply by sliding

it out.

• The jet (O) will now be accessible at the top of the valve (M).

• Unscrew the jet (O) from the valve (M) using a suitable spanner.

• Do not use pliers on the jet as this may damage the jet, making it unusable or impossible to

remove. Screw the new jet into the valve. Do not over-tighten as this may damage the jet.

• Re-ﬁt the valve and baseplate in the reverse order of assembly. When re-ﬁtting the valve,

ensure that the valve spindle aligns with slot in the tripod housing.

• Reconnect the gas supply. in Section 2.

Replacing the Hose:

• The ﬁtting of a hose is described in Section 2.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cadac Skottel Braai 50 - 8309T-13 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4.98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cadac Skottel Braai 50 - 8309T-13 Manual

Product: