An approved hose and regulator connected to a refillable gas container not exceeding 11kg and
complying with local regulation in force
Nominal usage
Gross nom. heat input
Outer Ring
Butane - 742 grams/hourButane - 742 grams/hour
5.1 kW per burner
(5.1 kW x 2 = 10.2 kW in total)
5.1 kW per burner
(5.1 kW x 2 = 10.2 kW in total)
0.50
Five Jet Turbo Burner
Jet number (x4)
Inner Burner
0.55
Jet number (x1)
Butane - 771 grams/hour
5.3 kW per burner
(5.3 kW x 2 = 10.6 kW in total)
0.50
0.55
PL
I
3B/P (37)
Butane @ 37mBar
Propane @ 37mBar
Butane/Propane mixtures
@ 37mBar
Country name abbreviations
AT =Austria
BE = Belgium
CH = Switzerland
DE = Germany
DK = Denmark
ES = Spain
FI = Finland
FR = France
GB = United Kingdom
IE = Ireland
IT = Italy
NL= Netherlands
NO = Norway
PT = Portugal
SE = Sweden
PL= Poland
Fig.1
accessible parts may be hot. Keep young children away at all times.
Use protective gloves when handling hot components.
Turn off the gas supply on the gas container after use.
Do not modify the appliance. Modifying the appliance may be dangerous.
The hose and seal on the regulator must be checked for wear or damage before every use and before
connecting to the gas cylinder (see fig.1).
Ensure the appliance is used away from flammable materials. Minimum safe distances are 1.2m above the
appliance and 600mm to the rear and sides of the appliance (see fig. 2).
Do not use an appliance that is damaged, leaking, or which does not operate properly.
Warning:
Do not leave the appliance un-attended whilst operational.
The appliance consumes fuel and air for combustion and gives off gasses like carbon monoxide that could be
harmful. Carbon monoxide is a clear odorless gas that causes flu-like symptoms and can cause possible death
if inhaled by a person in an enclosed area without ample ventilation.
Keep gas cylinders
away from heat and flames. Do not place on a stove or any other hot surface.
Ensure that the assembled unit is stable and does not rock.
Do not cover or change the primary air supply openings in the burners as this will affect the performance of the
product and may lead to an unstable flame.
In the event of burn back, (where the flame burns back and ignites at the jet), immediately turn off the gas supply by first closing the control valve on the gas
cylinder and then the appliance valve.After the flame is extinguished remove the regulator and check the condition of its seal.Replace the seal if in doubt.
Re-light the appliance as described in Section 3 below. Should the flame light back persistently return the product to your authorized CADAC repair agent.
Do not modify the appliance or use it for anything which it has not been designed for.
During use, part of the appliance will become hot, particularly the cooking areas and the hood.Avoid touching hot parts with your bare hands. The use of
oven gloves is recommended.
This appliance consumes oxygen and needs ventilation for optimum performance and for the safety of those in close proximity.
Do not move the appliance while in use.
The parts sealed by the manufacturer or its agent must not be altered by the user.
Do not twist or pinch the hose. Ensure that it is kept away from the BBQ body so as to prevent deterioration/damage to the hose caused by heat.
Fit one end of the low pressure hose onto the regulator nozzle, and the other end onto the BBQ nozzle by pushing the ends on as firmly as possible. Clamp
into position using a hose clamp at both ends of the hose.The hose used must comply with BS 3212:1991 / SABS 1156-2 or equivalent. In SouthAfrica the
regulator used must be 2.8kPa and complies with SANS 1237.
Ensure that the connections are made securely and do not allow gas to leak.
Check for gas leaks before using the appliance.
For use with an approved hose and regulator connected to a refillable gas container not exceeding 11kg and complying with local regulation in force.
NOTE: Do not obstruct the ventilation openings of the container compartment during appliance installation.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Cadac BRAAIMAXX 98504 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Cadac BRAAIMAXX 98504 in the language / languages: English as an attachment in your email.
The manual is 6,58 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
