684187

Cadac 8405 - LEISURE CHEF Manual

5
Zoom out
Zoom in
Previous page
1/11
Next page
6. Caring For The Grill Plates
The Non-stick reversible grill plate is coated with a tough durable non-stick coating that has been
used with great success on some of the best cookware in the world. Nevertheless, taking care of
it can help you to enjoy extra years of healthy, easy, non-stick cooking.
Use only low or medium heat settings to help retain the valuable nutrients in the food and
maintain the non-stick surface.
Whilst the non-stick coating is very durable, it can easily be damaged by the use of metal
cooking utensils. It is therefore recommended that only plastic or wooden utensils be used when
cooking.
Do not overheat the Non-stick reversible grill plate and always add a little cooking oil to the
surface before use.
The non-stick coating is perfectly safe in the dishwasher, but the non-stick surface is so easy to
clean that a quick hand-wash does the trick. The use of abrasive detergents is not
recommended, as this will permanently damage the non-stick surface.
After cleaning recondition the surface with a light wipe of oil.
Always allow the Non-stick reversible grill plate to cool before immersing it in water.
7. General Maintenance
8. Cleaning
After cooking, leave the burner on low with soapy water in the cooking dish to
soften cooking residue. When satisfied that excess fat has been removed, wash the Skottel BBQ
in warm water using a suitable non-abrasive detergent. Do not use sharp metal objects or
abrasive detergents on the vitreous enamel coated surface.
Remove the fat from the moat at the bottom of the Fat Pan (B) and clean as described for
the Skottel BBQ. Wash the Wire Grid and Deflector Plate in warm water with non-abrasive
detergent after wiping off any excess fat left after cooking.
: Wash the BBQ Lid in warm water using a suitable non-abrasive detergent. Do not use
sharp metal objects or abrasive detergents, as this will damage the surface coating.
For stubborn stains, oven cleaner may be used.
Skottel BBQ:
BBQ:
BBQ Lid
Note:
9. Storage
Handle the appliance with care. Do not drop it.
After use, wait until the appliance has cooled down, disconnect it from the gas cylinder and store
it in a cool dry place away from heat.
Keep the lid closed when not in use as this will prevent dirt and insects falling into the unit, which
may affect the gas flow.
Use a CADAC BBQ cover, especially if the unit is stored outdoors.
This appliance does not require scheduled maintenance.
Your Leisure Chef is fitted with a specific size jet to regulate the correct flow of gas.
Should the hole in the Jet become blocked, this may result in a small flame or no flame at all.
Do not attempt to clean the Jet with a pin or other such device as this may damage the
orifice (hole), which could make the appliance unsafe.
To replace the Jet: Unscrew the fitting connected to the inlet of the valve before unscrewing the
valve covers. that because the valve inlet has a left-hand thread, unscrewing any
fitting requires clockwise rotation when viewed from the fitting end of the valve.
Start by unclipping the plastic indicator from the control knob. This will expose a screw that
needs to be removed with a star screw driver. Once the screw has been fully unscrewed and
removed, you can pull the control knob off the valve spindle (see fig. 7a and b).
Using a star screw driver, undo and remove the 3 screws holding the front and bottom valve
covers in place (see fig. 7c).
Remove the front cover by unclipping it from the bottom cover and pulling it off the valve
spindle (see fig. 7d).
Turn the burner pan over so that the bottom valve cover face up. Unscrew the 2 fixing screws
and lift the bottom cover from the burner pan, this will expose the valve (see fig. 7e).
Undo the 2 screws holding the valve and place and carefully lift the valve out of the valve
box. Be carefull not to damage the piezo ignition wire (see fig. 7f and g).
With the valve in hand, use a suitable size spanner to loosen and remove the jet. Screw the
new jet into the valve, being carefull not to overtighten the jet, as this may damage the jet.
Do not use pliers to remove the old jet, or fit the new jet, as this may damage the hexagon
head, making it unusable and / or difficult to remove.
Reverse the above procedure to re-assemble the unit
Reconnect the gas supply as described in the Assembly Instructions.
The fitting of a hose is described in Section 12 - Assembly of the Appliance.
Replacing a Blocked Jet:
Replacing the Hose:
(see fig. 7a-g)
Remember
Fig. 7a
Fig. 7c
Fig. 7d
Fig. 7e
Fig. 7f
Fig. 7g
Fig. 7b
Unscrew
Unscrew
Unscrew
Unscrew
Unscrew
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cadac 8405 - LEISURE CHEF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cadac 8405 - LEISURE CHEF in the language / languages: English as an attachment in your email.

The manual is 5,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cadac 8405 - LEISURE CHEF

Cadac 8405 - LEISURE CHEF User Manual - German - 11 pages

Cadac 8405 - LEISURE CHEF User Manual - Dutch - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info