684186
9
Zoom out
Zoom in
Previous page
1/11
Next page
After assembling the utility tray, it is necessary to fit the cylinder support bracket. This is easily done by opening the bracket (see
Fig 15).
Fit the bracket by aligning the hook at the top section of the metal bracket with the cut-outs in the utility tray plastics and hanging it
onto the metal frame of utility tray (see Fig. 16).
Make sure that the bracket is hanging from all 4 hooks and that all 4 hooks are correctly clipped in as per illustration (see Fig. 17).
?
?
?
Fit the drip cup to the drip cup holder by sliding the round side of the drip cup into the holder first. Gently push the drip cup into the
holder until you feel a ‘click’. To remove the drip cup, squeeze the locator clip on either side of the drip cut inwards (towards each
other) and gently pull the drip cup out of the holder (see Fig. 18).
?
?
The fat pan simply drops into the burner pan and sits on the aluminium die-castings inside the burner pan. Make sure that the fan
pan is properly aligned. The large recess in fat pan need to line-up with the recess in the burner pan. The die-casting on the fat pan
also need to be in-line with the handle on the burner pan (see Fig. 19a-c).
The fat pan must always be fitted as the appliance cannot be used without it.
When using the bbq grid and aluminium grill, you need to fit the bbq deflector plate. The deflector plate helps distribute the heat
evenly, and acts as a fat deflector.
Place the deflector plate over the stainless steel flame tamer and have it sit of the 3 stainless steel stand-offs. Make sure the
deflector plate is properly located and that is centrally aligned over the flame tamer. (i.e. the deflector plate need to sit properly on
all 3 stand-offs) (see Fig. 20)
?
Fig. 20
Fig. 15 Fig. 16 Fig. 17
‘click’
Fig. 18
Fig. 19a Fig. 19b Fig. 19c
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cadac 8404 - LEISURE CHEF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cadac 8404 - LEISURE CHEF in the language / languages: English as an attachment in your email.

The manual is 5,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cadac 8404 - LEISURE CHEF

Cadac 8404 - LEISURE CHEF User Manual - German - 11 pages

Cadac 8404 - LEISURE CHEF User Manual - Dutch - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info