Boiling: Place the cooking vessel (pot, pan or kettle) centrally onto the pot stand. Pot sizes that may be used vary between minimum 150mm and
300mm maximum in diameter. Be carefull not to turn the heat up too much when using pots with plastic handles as they may be damaged by heat
escaping from underneath the pot. Depending on the conditions and the pot size used, one liter of water will boil in approximately 6 minutes.
Grilling and Frying: The non-stick coated aluminium grill plate heats up quickly and evenly, searing meats and locking in their
natural juices and flavours.
(Model 5910 only!)
6. Caring For The Grill Plate
?
?
?
?
?
?
?
When using the grill plate for the first time, lightly coat the cooking side of the grill plate with oil before heating.
Pre-heat the grill plate before cooking and use only low or medium heat settings. Don not over heat the grill plate.
Whilst the non-stick coating is very durable, it is recommended to use only plastic or wooden utensils when cooking as metal utensils will tend to
damage the coating.
Always let the grill plate cool down before immersing it in water.
The non-stick coating is perfectly safe in the dishwasher, but its surface is so easy to clean that a quick handwash does the trick. The use of
abrasive detergents is not recommended, as this will permanently damage the non-stick surface.
If burned grease or food residue collects on the surface, it can usually be removed with warm water and a mild detergent. In an extreme case, it
can be removed by a thorough cleaning with a mixture of 3 tablespoons of bleach, 1 tablespoon of liquid detergent and 1 cup of water.Apply to the
cooking surface with a sponge or plastic scrubbing pad.
After cleaning recondition the surface with a light wipe of oil.
7. General Maintenance
?
?
?
?
?
?
?
To remove the seal from its location groove, use a pointed instrument to lift it out of the groove. Take care not to damage the surface of the location
groove.
To fit a replacement seal, squeeze the seal to an oval shape, push one end into the location groove, then gently push in the rest of the seal until it
is fully fitted into the location groove.
If the flame power drops or the burner will not light, check that the gas cartridge still contains gas (shake to hear the noise made by the liquid). If
the cartridge still contains gas, the jet may be blocked.
The Jet is now exposed for removal.
Unscrew the jet using a suitable size spanner. Do not use pliers as this may damage the jet, making it unusable or impossible to remove. Do not
attempt to clean the old jet, rather fit a new jet. Do not over tighten the jet (see fig. 5a-c).
To re-assemble the appliance, gently screw the burner assembly back into position in a clockwise direction.
Replacing a blocked jet
Gently unscrew the burner assembly, by turning it in an anti-clockwise direction.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Cadac 5910 - Cook and Grill 200 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Cadac 5910 - Cook and Grill 200 in the language / languages: Dutch as an attachment in your email.
The manual is 0,83 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
Others manual(s) of Cadac 5910 - Cook and Grill 200
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
