ThisappliancecomplieswithBS EN 484: 1998andSANS 1539: 2003.
The appliance should only be used with an approved hose and regulator.
Gas appliances require ventilation for efficient performance and to ensure the safety of users and other persons in close proximity.
2. General
Do not use the appliance if it has a damaged or worn hose. Replace the hose.
Do not use an appliance that is leaking, damaged or which does not operate properly.
Do not twist or pinch the hose. Ensure that it is kept away from the stove body so as to prevent
deterioration/damage to the hose caused by heat.
Fit one end of the low pressure hose onto the regulator nozzle and the other on to the stove tailpiece
by pushing it on firmly as far as possible and clamp into position using a hose clamp on both ends of
the hose.
and away from other people.
Keep gas cylinders away from heat and flames. Do not place on a stove or any other hot surface.
Do not try to move the cylinder whilst the unit is in operation.
The gas cylinder must be disconnected from the appliance after use or when in storage.
Not for use with a remote gas supply.
Ensure the appliance is used away from flammable materials. Minimum safe distances are; above the appliance 1.2m, at the rear and sides 600mm.
Ensure that the assembled product is stable and does not rock.
Never leave the appliance unattended when lit.
This appliance consumes oxygen and needs ventilation for optimum performance and for the safety of those in close proximity.
Do not modify the appliance. Do not use it for anything for which it has not been designed.
During use, parts of the appliance will become hot (particularly the burner).Avoid touching hot parts with bare hands, the use of gloves is recommended.
Keep young children away from the appliance at all times.
Do not twist or pinch the hose.
Do not move the appliance while in use.
In the event of light back (where the flame burns back and ignites at the jet) immediately turn OFF the gas supply by firstly closing the control valve on
the gas cylinder and then the appliance valve.After the flame is extinguished remove the regulator and check the condition of its seal, replace the seal
if indoubt.Also check that there is no foreign material inside the venturi. Re-light the appliance as described in Section 5 below. Should the flame
persistently light back return the product to your authorised CADAC repair agent.
If there is a leak on your appliance (smell of gas), turn OFF the gas supply, firstly at the gas cylinder and then on your appliance by turning the
respective knobs fully clockwise. Take both the cylinder and the appliance outside immediately into a well ventilated flame-free location where
the leak may be detected and stopped.
If you wish to check for leaks on your appliance, do it outside. Do not try to detect leaks using a flame. The correct way is to smear the
joints with soapy water, if bubbles form then there is a gas leak. Immediately turn OFF the gas supply, firstly by closing the
control valve on the gas cylinder and then the appliance valve.Check that all the connections are properly fitted.
Re-check with soapy water.
If a gas leak persists return the product to your CADAC dealer for inspection / repair.
Hose
Gas Container
Assembly and Use
Light Back
Leaks
The hose and seal on the regulator must be checked for wear or damage before every use and before connecting to the gas cylinder.
This product may be used with gas container / refillable cylinder complying with local regulation in force.
Ensure that the gas cylinder / container is fitted or changed in a well ventilated location, preferably
outdoors, away from any source of ignition, such as naked flames
Use Outdoors Only.
Gas cartridges / refillable cylinders are to be used only in the upright position so as to ensure proper
fuel withdrawal.
Failure to adhere to this may cause liquid discharge from the gascontainer resulting in a dangerous
operating condition.
DK, FI, NO, NL, SE,AT, DE
Country of Use
DE,AT
BE, ES, FR, IE, IT, PT, GB, CH
I
3B/P (30)
Appliance Categories
I
3B/P (50)
I
3+ (28-30/37)
Butane@50mBar
Propane@50mBar
Butane/Propane Mixtures
@50mBar
Allowable Gases and
Operating Pressure
Butane@28-30mBar
Propane@28-30mBar
Butane/Propane Mixtures
@28-30 Bar
Butane@28-30mBar
Propane@37mBar
Jet Number
Nominal Usage
Gross Nom. Heat Input
71H
68H
Butane-140 grams/hourButane-140 grams/hour
Butane-195 grams/hour
1.92kW
1.92kW
2.6kW
An approved hose and regulator connected to a refillable gas container not exceeding 11kg and complying with
local regulation in force.
Gas Supply Sources
GB
CAUTION
IMPORTANT
Provide ample ventilation. This gas appliance consumes air (oxygen). Do not use this appliance in an unventilated space to avoid endangering your life. If still more gas appliances and/or occupants
using gas are added to the space, additional ventilation must be provided.
Read these instructions carefully so as to familiarise yourself with the appliance before use.Retain these instructions for future reference.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Cadac 182F - 2 COOK Supreme in the language / languages: English as an attachment in your email.
The manual is 1,64 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
